home › Body › What paint to combine to get brown. Color mixing brown

What paint to combine to get brown. Color mixing brown

Everyone from school knows that if you mix three colors - red, yellow and blue, then it will be brown. Here are just the often sought-after colors, as luck would have it, give completely unexpected shades. From the color of childish surprise to a fairly rich dark wood shade. So, maybe it’s not the colors that are to blame, but we didn’t listen well in the art lessons? Let's figure out together with the editors of the site how to make the brown color of the desired shade unnecessarily.

Read in the article

Mixing the base: how to get brown by simply combining the base colors

Think about how often you stopped in the department and among the many colors you chose your shade. The fact is that, despite its versatility and seeming routine, brown has dozens of shades. Try mixing watercolors, even in this example it is clear that the quality and saturation of the hue depend on the proportions of the primary colors, the possibility of adding brighteners.

Important! The base colors for brown are red, blue and yellow. By mixing the base, you can get many shades of brown.

How to get classic brown when mixing paints

You probably often caught yourself thinking why when mixed it looks like this, and after applying it to the wall - differently? It's simple, it's about lighting, simple physics. However, this must be taken into account when creating the basis.

A comment

Design studio "Uyutny Dom"

Ask a Question

"When mixing acrylic, oil paints, do not forget to thoroughly mix the white base before adding colors. It is better to mix the colors in a small container, note the proportions and only then "cobble" all the colors.

To make different tones of brown, it is necessary to alternate the proportions of each shade using the “poke” method. There are special ones. They can be purchased in specialized departments or check with the seller. For example, the shade of the bark of a tree is obtained from red, yellow and blue (indigo) in a ratio of 1: 1: 0.5.

How to get red-brown paint

If more red is required in a brown tone, then again take the three primary colors, but in different proportions: 2: 2: 0.5

Advice! Too dark tone can always be diluted with a white base. However, paints that tint the base should be used with caution. Changing the proportion can radically change the hue.

How to get dark brown

Usually in this case, a little blue or black is added to the resulting brown tone. The effect will be about the same. You will get a darker shade. Deep brown tone can be used on walls or highlight areas. It is highly discouraged to use this as a base. This will significantly darken the space.

How to make taupe paint

To create a taupe paint, add a little bit of white and a little less black to the mixed base. Shades can be very interesting.

Who said you can only use matte colors? In the resulting one, you can add not only gray, but also mother-of-pearl shades. Change the consistency by including natural inclusions, for example, marble chips. This consistency will favorably emphasize the shades, giving a unique style.

How to get light brown

In order not to get the previous shade of paint instead of light brown, you need to add a little red and yellow to the resulting color. If you need a lighter tone, then add white.

What colors need to be mixed to get brown from different types of paints

Different types of paints behave differently when mixed. Oil paints are different from acrylic, enamels are different from those that are water-based. It is very important to consider the quality of the coating on which the tone will be applied.

Sometimes, after mixing colors, obscenely dirty shades are obtained. The answer is simple - study special color tables or schemes. The more detailed, the more broken down into shades, the better. The more different combinations will be available to you. On the color wheel, friendly shades are located side by side, but irreconcilable "enemies" are opposite. The very consistency of the colors is of paramount importance. Consider the options.

How to make brown from gouache paints

If already mixed colors are mixed, then this combination is called secondary. By the way, such combinations just turn out to be the most interesting.

Advice! Combining more than three colors is not recommended. It is believed that in this case there are more chances to "run into" an unfriendly color.

As we noted above, it tends to lighten after drying. This effect is most noticeable when mixing gouache. Therefore, to obtain the desired shade, they are mixed in the palette. How to get brown with gouache:

We connect green and red. If there is no green, mix it from yellow with blue. The sequence of steps matters.
If you have orange paint, you're in luck! It remains to add only blue. What if there is no blue? It can also be created by mixing yellow and red.

The human eye is able to "see" a huge number of shades. But all of them are obtained by mixing only three colors: green, yellow and red. All the rest are considered secondary, derived from them. Today we will look at several ways to help you understand what paints to mix to get brown.

Mixing Rules

Even black is the result of combining primary colors in a certain proportion. It is added to darkening compositions. White is neutral, with the help of which paint or gouache can be lightened.

Before figuring out what colors to mix to get brown, it's important to learn some principles for combining colors:

These rules apply to any composition: oil, alkyd, artistic, acrylic paints or gouache. It is better to combine them in white dishes - this way the result will be better visible.

Basic ways

Brown is obtained using many colors: blue, red, yellow with the addition of neutral white, green. By combining them, you can achieve a different shade:

combining green with red will give you a classic brown; moreover, red is introduced gradually so as not to turn the final tone into a brick one;
purple with yellow - depending on the amount of purple, the shade will be “cold” or “warm”;
bright orange with blue in a ratio of 9: 1;
dark gray with orange: but this tone will always have only a "cold" shade regardless of the amount of orange.

If you need to get a dark brown color, add black to the resulting color until you get the desired one. Neutral white will help brighten it up.

shades of brown

So, we figured out what colors to mix to get brown. But he has many shades. We list the main ones:

dark brown: the result of mixing red, black and neutral white with the addition of yellow;
light brown: yellow is taken as the basis and gray and dark brown are gradually added to it;
terracotta: is the result of adding orange to brown;
burgundy: a mixture of red and brown (they will be the main ones), you also need to add a little yellow and black;
honey: you will need 3 colors, yellow, white (they are taken equally), and also dark brown;
dark chocolate: mix dark green, juicy orange, bright red; the result is darkened with black paint or brightened with white.

But don't be afraid to experiment. After all, artists have so far counted 195 tones in this color. Perhaps you will open another one, the 196th.

This shade is not too bright, but popular. It is actively used for decorating the interior of a room, when painting furniture, making up, while painting canvases, and also for changing hair color. Based on this, the question of what needs to be mixed with what to obtain the desired result is very relevant.

What colors make brown

Proper mixing is a whole science, but today the task is made easier by a ready-made color wheel, which can be seen on the Internet. It gives an understanding that the main colors are yellow, red and blue. The circle represents the result of mixing each of these options with each other - secondary colors. If you combine them, then you get tertiary ones. There are three main laws in mixing:

Law number 1. Each color of the circle is a symbiosis of those opposite to the center, which, when mixed, give an additional color, that is, achromatic. Complementaries are clearly defined, for example, red has green and yellow has blue.
Law number 2. It is used in practice, indicating that when mixing paints that are close to each other along the color wheel, new colors of the main color scheme are formed - the one that is located between the mixed pigments. So, to get orange, you should combine red with yellow, and green - mix yellow with blue. By combining in ambiguous proportions the three main components in the form of red, yellow and blue, any effect can be obtained.
Law number 3. From the same shades, when mixed, similar mixtures are obtained. This result is achieved by combining colors that are identical in tone, but different in saturation. Another option: mix several colors by symbiosis of chromatic with achromatic.

What colors should be mixed to get brown

Gouache artists know that when different colors are combined, new colors are born. Even a special synthesis table has been created, which helps to make the necessary shades. The most elementary way to get brown is to add red to green. These tones are in any hardware store or in the stationery department. However, you can’t mix dark red and dark green, because you get a dirty shade that vaguely resembles black.

Not sure how to get brown when mixing paints if there is no green in the palette? In this case, you can use three colors: red, blue, yellow. This is due to the fact that green is obtained through the synthesis of blue and yellow. For another blending option, gray paint plus orange, or purple and yellow, will be used. So, the missing pigments that make up the basic formula can always be replaced.

How to get dark brown

The desired result is easy to obtain: add a little bit of black pigment to red, orange or yellow. Brown can easily be given different shades: you need to take yellow, blue and red as a basis, and then add other colors. For example, red helps to create a warm tone with a hint of rust, while blue helps to achieve depth and catchiness in the final result. Saturation can be achieved by combining different proportions of yellow, blue and red according to the scheme:

Mustard can be obtained by combining red, yellow and black with a drop of green.
Dark brown will be achieved by mixing red, yellow, white and black.
Red-brown (known as marsala, similar to dark pink) should be obtained by mixing two shades: chocolate and red in large quantities.

What colors to mix for brown light shades

To create a coffee with milk, a beautiful copper brown, an unusual taupe or honey brown, white should be used. How to make brown from light colors? It is necessary to add a little white to the mixture consisting of the main colors. If yellow prevails in the consistency presented above, then ocher will be obtained, that is, a light shade of brown. To understand how to get brown when mixing paints, training with compatible proportions will help. Only in this case you can get the perfect result.

Video: what colors to mix to get brown

Brown is a mixed color, formed as a result of the merger of several (2 or more) saturated shades. It is not included in the color spectrum, as well as pink, white, gray and black. Due to the use of wood to create furniture, the color has become one of the most sought after in the interior. In many cultures, it is considered a symbol of fertility. And a few tens of thousands of years ago, people used the brownish pigment umber to create rock art. In ancient times, cuttlefish ink was used to make sepia colors. They were also used at a later time, the Renaissance period, by artists such as Raphael and Leonardo da Vinci. Brown was widely used by painters of the 17th-18th centuries. In those days, they already knew how to make the perfect brown. In the era of modernism, colorful and golden tones were replaced by its shades, which became an attribute of new trends in design and architecture.

Features of color and its shades

In nature, brown is obtained as a result of the solidification of liquids of yellow hues. Because of this, it is sometimes referred to as dark yellow. The similarity with mixed colors, for example, with bronze, chestnut and coffee, is explained by the large number of different pigments in their composition. In fashion, brown has always been opposed to bright saturated tones, and therefore has received a reputation as “adult and solid”. This color scheme also includes many shades. They got their names due to the prevalence of brown in nature and everyday life. Among them are wheat, brown, rusty, copper, dark beige, brown, chocolate, as well as khaki, sepia and the color of withered leaves. Some tones have a peculiar ebb. Maroon is also considered a shade of brown, but this does not apply to burgundy in general, which, in principle, is not mixed, but is close directly to red.

Pros and cons of self-mixing

It is recommended to buy ready-made brown paint if you are not sure of the quality of self-mixing. When using, in particular, acrylic paints, there may be problems with applying to clothing or canvas - they will look different there. This is influenced by some components and features of raw materials from a particular manufacturer. If you need to paint a lot of walls, there are two options - buying ready-made paint or preparing it to order. It will not work on your own to make two mixtures of an absolutely identical shade - you need special equipment. In a simpler situation, experimentation should not be avoided. You can fully implement your ideas about shades. There will be some downsides to this process. Since the entire volume of paint is calculated initially, “misses” are possible. In addition, tinting takes a lot of effort. The problem will be the synthesis of saturated tones. Well, the main disadvantage can be considered a high tendency to fading, characteristic of such solutions.

However, there are many advantages:

saving;
a wide range of colors for cooking;
creation of unique shades and their adjustment;
mixing near the job site.

Rules for mixing tones

There are several systems and models that determine the interaction and similarity of colors. The science of the different aspects of the compatibility of shades and their use in art is called coloristics. One of its foundations is the color wheel, including intermediate colors. For the synthesis of different tones, 3 basic colors are used: red, yellow and blue. A special role is also given to achromatic - black and white. Mixing rules are built around these features. You need to mix watercolor, acrylic, gouache, oil, water-based and building paints on a white palette - the resulting shade is so clearly visible. Instead, you can also use a white earthenware plate, and sometimes even plastic dishes, white cardboard or thick paper. There are 4 basic rules for color mixing:

There are achromatic tones (white, gray, black) and color (everything else). In the second category, they differ in saturation, depth, brightness, lightness, and hue.
You can mix mechanically (by mixing) and optically (by putting strokes on top of each other).
When merging 2 of the main tones, you will get intermediate ones between them on the color wheel.
When mixing 2 opposite colors on a circle, you get a composite that is unlike them.

Primary colors for brown

Brown is obtained by mixing several pigments. Experienced professionals can ideally calculate the desired proportions of the three primary colors. However, in practice it is more convenient to mix 2 colors, and gradually. Classic combinations for the synthesis of brown tones are combinations of red and green, orange and blue, as well as purple and yellow. In each case, one paint is used as a base, while the other gradually forms the desired classic shade of brown. So, you need to add red to green, blue to orange, and yellow to purple. The amount of pigment added should usually be much less. Other blending ratios will produce different, dissimilar shades of brown and other secondary colors. Brown can also be obtained by mixing in small quantities all the colors of the rainbow.
Important! You can improve the color with the help of special dyes.

Green with red

This is one of the combinations for creating dirty tones. If green is not at hand, then you will have to use the three primary colors, mixing blue and yellow in the desired tone. This combination, among other things, allows you to select different shades of green. This, in turn, will add variations to the final result from mixing red with green. What to add to what is decided individually. However, it would be more correct to pour red paint into a container with green, exactly until the hue and brightness become as needed. Whatever the proportion is in the end, the resulting shades will come out warm. It is worth experimenting with the ingredients: choose green in a dirty shade, for example, camouflage, or light green, and similarly in the case of red. Generally, the darker the red and green paint, the better.

Orange with blue

In this case, if necessary, the whole trio of basic tones is also used: if orange needs to be made independently, then red and yellow are mixed. The first should then account for 9/10, and the second, respectively, 1/10. This ratio can be varied, but it is a dark shade that is needed. The color of the solution can be made "intermediate" between orange and red. Blue is added to this mixture or to the finished orange paint. The required volume is selected individually, but in the range from 5 to 10 units. for 90-95 units. orange component, depending on the desired lightness and the original appearance of both ingredients. If the blue composition is used in the recommended amount, then it will remain possible to correct the brightness of the mixture or add cyanosis. You can look at the final color only after the film has dried. One way or another, it will come out lighter than the original version. It does not hurt to do preliminary tests on some surface.

Purple with yellow

Another way to get brown is to mix yellow with purple. In the absence of the second, a mixture of blue and red is made. Purple gravitates more toward blue, so more blue paint is needed to create the "true" color. Violet and red are adjacent on the spectral circle, but are at opposite ends of the visible spectrum. With equal proportions or a preponderance towards red, purple will be obtained. It is also suitable for subsequent mixing with yellow. The latter, one way or another, is used to add to a darker pigment. Yellowness must be added gradually so as not to make the mixture too light. The composition will need to be constantly mixed, otherwise you can miss the moment when the yellow is no longer needed. Next, you need to do a shade test on a solid surface. Decisions are then made based on the color of the surface layer.

The resulting paint is suitable for use on both mineral and metal surfaces.

Methods for obtaining shades of brown

To obtain warm shades, yellow or red should be added to brown paint. Large portions should not be poured immediately, gradual stirring is necessary. Light and warm shades of brown allow you to paint elements such as reflected light, earth, brick and wood surfaces. If the tone is too warm, then the balance can be restored with blue paint. You should initially add only a blue tone to create a dark and calm shade. Color can be varied with white and colored paints. To obtain dark brown shades, you need black pigment. Add no more than a few percent of the total volume of the mixture. It is very difficult to compensate for an excess of black, except perhaps by increasing the mass of brown by several times, and this is not always acceptable. Adding a lot of white or water to eliminate blackness will only make the mixture worse.

Compare results from different proportions of primary and secondary colors.
Experiment with shades and write down the ratio of colors in those mixtures that you like the most.

You can also create several different shades of brown for later mixing - often soft pleasant colors are obtained.

Getting a reddish brown

This color is also called terracotta. It is obtained by mixing red and yellow paints with a slight dominance of the first. For the final result, you need to add a small amount of blue tone and 0.1% white. Thus, you will need 3 primary colors and white. There are general recommendations about the proportion of tones. Red and yellow are taken approximately equally, and blue is 4 times less. However, in practice, the percentage of the latter can be reduced. Instead of yellow and red, you can theoretically take orange, but it should be borne in mind that when mixing the first two, as a rule, you get not pure orange with a pinkish tint, but pumpkin. You can achieve the desired color by mixing many saturated tones with a predominance of light shades, and among the entire palette, the emphasis should be shifted to the red region of the spectral circle.

How to make dark brown

One of the most sought-after shades, dark brown, is obtained in several ways. The first involves mixing 3 primary colors, red, blue and yellow, in equal proportions. Paints should not be too dark. Then add black to the desired saturation. The second method involves adding a small amount of black or blue paint to the resulting shade of brown, again until a certain darkness. The color will become deep. The third method is based on the use of 3 main colors of the visible spectrum: red, green and blue. To do this, take 2 different dark shades of green and blue colors and mix in equal proportions (i.e. 1:1:1:1). To the resulting mixture, add red and black, also in equal proportions. We do this until we reach the desired tone.

Some mixing tips:

if red, blue and yellow paints are used, then the latter should be added to the mixture of the first two;
yellow color can remove excessive shading;
for dark brown paint, a slight red or green tint is acceptable.

Mixing colors for a gray-brown shade

In this situation, there are many options for action. One of them involves manipulations with the standard brown color. In this case, you will need to additionally use white and black tones. We take white paint first and lighten the brown solution. Next, add a little black, stir the mixture thoroughly and see what happens. The taupe must be light enough to be mistaken for gray from a distance. We add much more white paint than black. Another method for synthesizing taupe involves adding a gray component to an orange solution. Lightness is regulated by black and white colors. One alternative method of using an orange base is to mix in blue and black components. We can get a distinct grayish tint by mixing orange on one side, and purple or purple and a small amount of black on the other.

What colors to mix for light brown

To prepare the base, any of the above combinations will do. For example, you can take the classic combination of red, yellow and blue colors. In this case, more yellow pigment is used, and the rest are selected in light colors. The resulting solution is clarified with white paint. To what extent to change the initial shade is a matter of personal preference. If necessary, it can be reddish, give off blue or purple, or be the color of cocoa. The mixture rarely turns out lighter than necessary, but if this happens - adding black paint will easily correct the situation. In any case, it is necessary to mix the ingredients gradually and in small quantities. If the paint is intended for painting, then when mixing it is better to use not a brush, but a special palette knife tool - then you can avoid streaks.

Color mixing table and their proportions to obtain brown

The most popular shades (one common option for each is presented):

Thanks to this table, you can accurately calculate the ratios without the risk of making a mistake. Usually 3 primary colors are enough to make a mixture of the desired shade from them alone, or to synthesize orange / purple / green for their subsequent mixing with red, blue or yellow. In some cases, black or white paint is indispensable. Of great importance is the brightness of the original tones. If it is unsuccessful to select the ingredients, then it will not always be possible to correct the color. It is necessary to add black in minimal portions, because it is the most difficult to “kill” this color. With proper skill, you can independently choose the components and get the same classic or special rare shades. The brown base for subsequent adjustment is synthesized even from a combination of yellow, turquoise and pink / magenta, which are secondary or completely absent in the spectrum.

Conclusion

Brown is one of those that you can bring out yourself. The synthesis of its shades allows different color combinations and proportions. The tint range includes several dozen original options. When one of them is selected for tinting, you need to decide on the constituent ingredients. For some color combinations, exact proportions are calculated, which greatly simplifies the work. At the same time, small errors in the tinting process will not affect the final result. Brown can be created by merging orange and blue, red and green, purple and yellow, and in many other ways using 2, 3, 4 or more colors. Lightness is regulated by black and white. Self-mixing is very convenient for painting and other works in a small area. In other cases, it is better to purchase a finished color.

There are several ways to obtain different shades of this color. In any case, in order to get brown, you just need to mix the two primary colors and add an additional one to them. That is:

mix blue and yellow to get green, and then add red to it,
mix red and yellow to get orange and add blue,
mix red and blue and add yellow to the resulting purple.

So, we figured out how to get brown when mixing paints. To do this, you need gouache, watercolor, water emulsion, etc. in red, yellow and blue. But sometimes for coloring or painting, not just brown, but brown of a certain shade is required. So, interior items are usually decorated in bright colors. The earth, for example, in the pictures is drawn almost black. So how do you get light brown or dark brown? The answer to this question is also quite simple.

To get a dark brown, you just need to add a black component to it. But when mixing in this case, you need to use only very small portions. Add black to brown should be literally drop by drop. Otherwise, you can simply spoil the paint. In this case, the mixed mass must be mixed very well each time until a homogeneous consistency.

To obtain a light brown color, ordinary white is most often used as an additive. Special care when mixing in this case is not necessary. After all, with an excess of white in the paint, you can always just add a little more of the original color.

Brown, of course, is not only light or dark. This color can also vary in shades. So, for example, red gives brown a rusty tint. When yellow is added, this color becomes slightly "ocher". Blue makes brown more saturated and contrasting.

So, we hope that we have answered in sufficient detail the question of what paints need to be mixed to get brown, as well as how to make this color more saturated, lighter or darker. As you can see, getting the desired result in this case is extremely simple. The main thing is to do everything slowly and carefully and, of course, not be afraid to try and experiment.

How to get brown when mixing paints: several ways
?, Brown &mdash, the color is relatively discreet and dim, but still quite popular.

What color pigments can mix to make brown paint?

To determine which colors you need to mix to get the right color, it is best to use a color triangle, which will very clearly show which colors you mix to get the desired color.

To get brown, you need to mix green and red.

An artist can mix green and red paint to make brown. In addition, there are several other ways to achieve different shades of brown.

Brown can be obtained by mixing a secondary color with a primary color. For example, you can mix yellow and red together to make orange, which makes a secondary color, and then add blue (the primary color), which turns it brown.

Another easy way to create brown is to mix any shade of orange with black. You can add more black paint to create a dark brown, or add white paint to lighten the paint to a softer shade.

Get brown You can use several ways to mix colors:

To obtain a classic brown color, mix

red and green
red, yellow, blue(in equal proportions)
orange and blue
orange and gray
yellow and purple

To obtain different shades of brown in a mixture of red, blue and yellow, different proportions of colors give the following shades:

blue will give depth and contrast to brown,
the predominance of yellow - will give the color of ocher,
increasing the red will give a warm shade with a touch of rust.

In addition, to obtain the desired shade, you need to add black drop by drop to red, yellow, orange paints. And to get a lighter shade, add a little white.

What colors mix to make brown?
To determine which colors you need to mix in order to get the desired color, it is best to use a color triangle, which will very clearly show which colors you will not get from mixing.

What colors make brown

Law number 1. Each color of the circle is a symbiosis of those opposite to the center, which, when mixed, give an additional color, that is, achromatic. Complementaries are clearly defined, for example, red has green and yellow has blue.
Law number 2. It is used in practice, indicating that when mixing paints that are close to each other along the color wheel, new colors of the main color scheme are formed - the one that is located between the mixed pigments. So, to get orange, you should combine red with yellow, and green - mix yellow with blue. By combining in ambiguous proportions the three main components in the form of red, yellow and blue, any effect can be obtained.
Law number 3. From the same shades, when mixed, similar mixtures are obtained. This result is achieved by combining colors that are identical in tone, but different in saturation. Another option: mix several colors by symbiosis of chromatic with achromatic.

What colors should be mixed to get brown

How to get dark brown

Mustard can be obtained by combining red, yellow and black with a drop of green.
Dark brown will be achieved by mixing red, yellow, white and black.
Red-brown (known as marsala, similar to dark pink) should be obtained by mixing two shades: chocolate and red in large quantities.

What colors to mix for brown light shades

How to get brown when mixing paints
Learn how to get brown when mixing paints - up-to-date information for those who want to dye their hair or decorate the interior. There are several ways.

Brown can be obtained by mixing different colors: since this tone is complex and all primary colors are involved in its creation. Shades of brown - also a huge variety. To obtain them, tones such as yellow, red, blue, white, black are added. You can always easily transform one Tone into another, since the tone is very sensitive to components, and the eye perceives a wide range of them.
With the help of paint, brown shades can be mixed in 4 ways, 3 of which are based on the theory of additional pairs, which implies that when such colors are mixed, a gray tone is obtained, but this effect works if the color carrier is a light wave. For pigment paints, there is a different alignment:

Mixing additional colors, we get brown

A pair of additional tones: yellow + purple, where the latter is the sum of red and blue. The tone is obtained with a yellow tint.

Pair: red + green, where the second is the sum of yellow and blue.
Shades are closer to red - with medium green - rich red-brown, with emerald - dark chestnut.

Pair: orange + blue, where orange = yellow + red.

In this case, a gray-brown tone is obtained: paired with blue - medium brown with a chocolate sheen, paired with indigo blue - dark brown - dark chocolate.

Getting brown and its shades from primary colors?

If we decompose the colors from which brown is obtained, then we can understand that it is formed only when yellow, red and blue converge - the main shades. Therefore, it is more logical and easier to create it by mixing these three tones together. In addition, it will be much easier to control its shades by changing the amount of one of the components.

How to get medium brown?

Mix three colors to get brown - the shortest way to the classic shades of tree bark: red + yellow + indigo blue in a ratio of: 1:1:0.5

How to get red-brown?

Red-brown can be created by mixing red, yellow, blue in the ratio: 2:2:0.5.
As a dark color - indigo needs little to change the tone, yellow, red, on the contrary, you need more, since they are light. For ease of approach, you can always correct the resulting brown color by randomly mixing it with red, yellow, while yellow is needed in order to make the overall tone lighter and more saturated.

How to get dark brown?

To get dark brown in the resulting arbitrary tone, it is worth adding blue (indigo) or black. Since dark brown hides the saturation of the shade, there will not be much difference between the resulting shades.

How to get taupe?

In order to get a taupe - you need any medium tone of brown in which you need to add white. If brown is needed darker: add black to it.

How to get light brown?

To get light brown in an arbitrary color, you need to add white. However, this mixing often results in taupe, as we see in the previous version, so red and yellow are mixed into the resulting light taupe.
As a result, the resulting color is darkened again (due to a darker red), but if we add more white to it, the result will be more attractive (up to beige):

The brightness of the resulting shades can also be enhanced:

So: let's summarize:

How to get shades of brown? Table

Let's combine all the data in a table so that you can visually see the dependence:
Darken brown - with black,
For red-brown - add red,
Yellow-brown (orange-brown) - yellow,
Olive brown - yellow + blue,
Purple-brown - red + blue,
Light brown - white.

The scheme of interaction of shades with brown, wagging on the final tone, will also be interesting.

In the scheme, the center is brown, from which the shade will be built. Around it are tones for mixing. The next circle will already be the resulting tones when mixing the base color with the shade-forming one, at a rate of 30%. Then shades with 10% admixture + additional: darkened (+20% black) and lightened (+20% white) from 10% shade.

How to get other colors and their shades: theory and practice. Click on the icon.

How to get brown by mixing paints
How to get brown? You need to mix red, yellow and blue. To achieve the desired shade, change the proportions. Photo, tables

Popular in category: