Why Tinyumbrella won't start: all possible causes and solutions. Restore iPhone, iPod touch, or iPad Firmware on Windows with SHSH Hashes

So, today we will look at all possible situations in which Tinyumbrella does not start. In fact, there are a lot of options for the development of events. And we will consider with you everything that can only meet on our way. After that, we will try to understand how to fix the situation. This is not so simple as it might seem at first glance. Thus, let's quickly start studying our topic today.

"Crooked" installation file

Well, the first option in which Tinyumbrella does not start is, of course, a corrupted installation file. In this case, even the installation will not be activated for you.

Fortunately, this option developments are not particularly common. And yes, it's pretty easy to remove. It is enough just to find and download a working version of the program. That is, a normal installer. After that, it remains only to start the installation process and wait a while. The program is installed, you can work. But what if Tinyumbrella won't start even after downloading the normal installer? What could be the reasons for such behavior? In fact, there are very, very many of them. Let's start, perhaps, with the most quickly eliminated and common cases that modern users can only face.

Installation failed

The second outcome that can happen to anyone and everyone is a failure during installation. Systematic, insignificant and imperceptible for us, ordinary users. But for a computer, to be honest, this is a weighty argument that allows you to block the launch of any application.

So, if, for example, during the installation process, you experienced power surges, error messages popped up, but you still continued to install the utility, and everything like that (it is worth considering that sometimes failures occur completely unnoticed by us), then do not be surprised that Tinyumbrella does not start (Windows, Mac or other operating system you have installed - it does not matter).

What can be done here? Luckily, you won't have to suffer for long. You just need to completely uninstall the program, and then resume the installation. This time, it would be better to disable the antivirus and not work at the computer for some time. Until the installation process completes. This is the only way to hope for a quick and accurate "healing". As you can see, so far nothing difficult or special. Now it's time to move on and think about situations where Tinyumbrella won't run on Mac OS and other operating systems. There are many reasons for such behavior. But for now, we will focus on the most common and safe ones.

Update

Well, here is another version of the development of events. He appeared relatively recently. The thing is that users began to complain that Tinyumbrella version 7 and later did not start. The fault was the most common update.

Modern creators, to be honest, have recently made users encounter problems after updating more and more often. What specifically caused this behavior is not known. But the fact remains that the app won't work no matter how hard you try. In extreme cases, it will perform its functions "crookedly" and with errors.

If you are wondering why Tinyumbrella does not start after the update, then you can try reinstalling your version of the program. Moreover, it is best to download the latest version of the application. This will keep you from repeating the problem. Very often, it is reinstallation that helps many users. True, not everything is always so good. Sometimes you may encounter a situation in which Tinyumbrella does not start even after troubleshooting during installation and "updates". What caused it? What to do? For now, there is no need to panic. In our "arsenal" there is another not particularly dangerous reason that causes this behavior. And now we get to know her.

swap problem

Well, here we are with you to the last "safe" reason, which can only cause problems with the launch and operation of Tinyumbrella. The thing is that after the release of version 5 of the application, many users began to complain about the inability to start. And it's not the update that's to blame. The case is a little different.

Starting from version 5 of the utility, for some unknown reason, the system began to crash. This caused a startup problem. Thus, it is necessary to eliminate this "surprise" every time. How to do it? Let's try to figure this out.

To get started, go to the path: "C:\Users\Username\.shsh\.cache", then look at the one and only document in the destination folder. It's called "lib-win jar". If you click on it, you will see that its "weight" is 0. This means that this file needs to be replaced. Find it on the World Wide Web and download it. Next, you need to go along the path already indicated above and throw the document there. You will be asked if you want to replace an existing file. Agree to a full replacement, and then restart your computer. That's all Now you can try to work in the program. Still Tinyumbrella won't start? Then let's move on with you to more dangerous and unpleasant moments that can only occur.

Lack of Apps

Well, here we are with you on the less common reasons for not launching our today's application. In truth, the scenario that we will now consider is not particularly dangerous. Rather, he is unpleasant. Plus, it can cause a lot of failures in various utilities.

The thing is that our today's program requires two main elements for its work - this is Net.Framework and a special one called Oracle. Thus, if Tinyumbrella does not start, Java (just the same "Oracle") or "Framework" is not on your computer.

Fortunately, fixing the problem is quite simple. It is enough to install the listed applications for yourself. Honestly, after that it would be better to reinstall our today's program. Then try again. Everything must work to its full potential. Only if you have not encountered the most unpleasant and already really difficult to fix problems. What exactly? Let's try to find out.

Incompatibility

So we have begun with you the most unpleasant moments that can only occur in relation to our today's question. The thing is that if Tinyumbrella does not start, and you have the latest version of Windows installed, then most likely this behavior is caused by the banal incompatibility of the utility with the operating system.

It doesn't seem to sound very intimidating. Only here it is simply impossible to put the program on an incompatible system. To make progress, you will have to completely reinstall Windows. The one with which the program is compatible. Sometimes this can be a huge problem. True, not always. In cases where you planned to reinstall, do not worry. But if this is an unforeseen step, then it would be better either not to use the utility, or to save absolutely all data to removable media before starting the process.

"Pirate"

The second dangerous moment that can only slip when Tinyumbrella does not start is the presence of a pirated version of the operating system. In this case, as a rule, you will have problems not only with our application, but, most likely, with many.

Pirated software is a huge guarantor of crashes and malfunctions. Unfortunately, most users prefer "broken" licenses. If Tinyumbrella does not start up for you, and on top of that, you use a "pirate", then you should not be surprised at this situation.

There are two ways to fix everything. The first is to reinstall an existing operating system. To be honest, not the best choice, because it works very, very rarely. The second option is to buy a licensed Windows. Expensive, but true and reliable scenario. As a rule, many users bypass it. In principle, if you have a huge amount of time and patience, you can try to reinstall the program itself. From the 20th time, maybe the utility will start.

Viruses

And here is last reason, which may cause the impossibility of Tinyumbrella to work. Of course they are viruses. A variety of computer infections are known to be the biggest and most common problem that a user can face.

What to do in this situation? First, check your computer for viruses. After that, using an antivirus and a variety of additional utilities, cure the computer, and then restart it. If everything went well, then the problem will disappear. No? Then reinstall the operating system.

Conclusion

So, today we have learned with you why Tinyumbrella does not start. In addition, we learned how to fix the problems that have arisen in the least dangerous and unpleasant methods.

Unfortunately, most problems are 100% fixed only by reinstalling the operating system. If you are unable to cope with the task on your own, you can contact the experts. They will in no time determine the reason for the lack of launching the utility on the computer, and also eliminate it.

If you're flashing an iPhone, keep in mind that upgrading the firmware also upgrades the modem. In most cases, this increase is irreversible! There is nothing to worry about if you do not need an unlock, but if you have a locked iPhone, you may permanently or permanently lose the ability to make calls. To upgrade the firmware on a locked iPhone, you will need to use.

This instruction is valid only for older firmware, which are more signed by Apple servers.
You can find out which versions of iOS are out of date on the pages with information on the corresponding firmware, or in our.
For current iOS versions, use .

This instruction does not apply to devices with Apple A5 and newer processors - iPad 2/3/4, iPhone 4S/5, iPod touch 5G, etc. Many of these devices cannot be rolled back to old firmware at all, for the rest you should use completely different .

  1. Download the latest version of iTunes from our site and install it (if you haven't already).
  2. Download and install the latest version of Java for Windows.
  3. Download from our firmware version you need.
  4. Download the latest version of the TinyUmbrella utility.
  5. Unzip the archive with TinyUmbrella, drag the program to the Applications folder and run it. Go to the "Advanced" tab and make sure that the checkboxes are set as in the screenshot below:

  6. If you already have the required SHSH hashes, then in Explorer go to your home folder, put the cursor in the path line and type "\.shsh", then press Enter. You will find yourself in a folder with hashes. Copy your files there. If you don't have pre-stored hashes, go to the next step.

  7. Plug in your device, select it in the TinyUmbrella sidebar. Go to the "Log" tab and click the "Save SHSH" button. Carefully follow the program log: for those firmwares that will be marked green, you have hashes on Cydia servers, for the rest - there are no hashes.

  8. If there are SHSH hashes for the firmware you need, click the "Start TSS Server" button. Do not close TinyUmbrella until flashing is complete!

  9. Hold down the Power (on the top) and Home (on the front panel) buttons for exactly 10 seconds, then release the Power, continuing to hold Home for about 8-10 seconds more. iTunes will launch and show next message:

  10. Click "Check". Another pop-up window will appear in which you need to click "OK".
  11. If you are syncing your gadget with iTunes, do it before flashing by clicking the "Sync" button. If you're backing up to iCloud, go to the "iCloud Storage and Backups" menu in your device's settings. Remember that when restoring, unlike updating, the device's memory is completely formatted, and you can restore content only if you have a backup copy!
  12. Hold down the Shift button on your keyboard, then click on the "Restore" button. Specify the path to the downloaded iOS file.
  13. Wait for the firmware recovery to complete and the gadget to load in normal mode.
  14. In TinyUmbrella, click the "Stop TSS Server" button.
  15. How to fix errors 1013, 1014 or 1015 when flashing

  16. In addition, when downgrading an iPhone or iPad with a cellular modem, iTunes is very likely to give an error in the range 1013-1015 in the middle of flashing. This is due to the inability to downgrade the modem. To boot your device normally after such an error, follow the instructions below.
  17. Again, hold down the Power (on the top) and Home (on the front panel) buttons for exactly 10 seconds, then release the Power, continuing to hold Home for about 8-10 seconds.
  18. In TinyUmbrella, press the "Fix Recovery" button and wait for the gadget to load in normal mode.
  19. If that doesn't help, download the latest version of redsn0w for windows.
  20. Unzip the archive, place redsn0w on your desktop. Run redsn0w, on the redsn0w start screen, click the "Extras" button.
  21. Make sure that the gadget is connected to the computer, then click the "Recovery Fix" button.
  22. On the next screen, click "Next".
  23. Then redsn0w will help you put the device into DFU mode. You will need to press the Power button for 3 seconds, then hold down the Home and Power buttons for 10 seconds, then release the Power, and hold Home for about 10 seconds.
  24. Wait for the device to boot up normally.

Today we will consider all possible situations in which Tinyumbrella may not start. In fact, there are not very many options for the development of events. This article will consider the main options for the development of events. We will also consider ways to solve this problem. By the way, this is not as simple as it might seem at first glance. Let's start studying the main topic of this article.

Corrupted installation file

One of the reasons why Tinyumbrella may not start is the “crooked” installation file. IN this case even the installation process of the program will not be activated. Fortunately, this scenario is not very common. Plus, it's pretty easy to fix. You just need to find on the Internet and download the working version of the installation file. After that, you will just need to start the installation process of the program and wait a while. When the program is installed, you can work with it. But what if, even after downloading the normal installation file, Tinyumbrella still won't start? What could be the reasons for such behavior of the program? They are actually very, very many. Perhaps it is worth starting with the most common and quick-fix cases that a modern user may encounter.

Failed to install

Another reason why Tinyumbrella can have problems is a failure during installation. This is an ordinary minor system failure that is not even noticeable to ordinary users. However, for a computer, this can be a powerful argument that allows you to block the launch of any applications. So, for example, if during the installation process power surges could occur, or error messages appeared, but you still continued to install the utility, then you should not be surprised that the Tinyumbrella program simply refuses to start. It does not matter what operating system is installed on your computer. What can be done in this case?

Fortunately, you won't have to suffer for a long time. All you have to do is uninstall the program and restart the installation process. This time, it would be better to turn off the anti-virus program and not work at the computer for some time until the installation process is completed. Only in this case it will be possible to hope for a "miraculous healing." As you can see for yourself, there is nothing special in fixing this problem. Let's go ahead and think about situations where Tinyumbrella won't run on Mac OS and other operating systems. This behavior can have many reasons. For now, we will focus only on the safest and most common reasons.

Tinyumbrella update

Consider another scenario. He appeared relatively recently. Recently, users often complain that Tinyumbrella version 7 and later does not start for them. It's all because of the installation of a regular update. Many modern updaters are increasingly causing users to encounter a number of problems after installing an update. What exactly could cause such behavior remains a mystery. However, the fact remains - the application simply refuses to work, no matter how hard you try. In extreme cases, it can perform its main functions crookedly and with errors. If you are wondering why the Tinyumbrella program does not start after the update, then you can try reinstalling the program version.

It's best to download the latest version of the app. This will allow you to protect yourself from a recurrence of this problem. Quite often, it is the process of reinstalling the program that allows users to fix the problem. However, not everything always ends well. Sometimes there are situations in which the Tinyumbrella program does not start even after fixing all the problems during the installation and update process. Than it can be caused? What to do in this case? At least don't panic. In our arsenal, there is one not very dangerous reason that causes this behavior. Let's take a closer look at it.

swap problem

We have reached the last "safe" reason that can cause problems with the operation and launch of Tinyumbrella. The problem is that after the release of version 5 of the application, many users began to complain about the inability to start. It's not the update that's to blame. It's all about something else. Starting from the utility version 5, the file swap system began to fail for some unknown reason. The result was a startup problem. For this reason, this "surprise" has to be eliminated. How can this be done? Let's try to figure it out this issue. First of all, you need to go to the path "C:\Users\Username\shsh\cache".

After that, you need to look at one single document, which is located in the destination folder. It's called "lib-win jar". If you click on it, you can see what weighs from 0. This means that this file needs to be replaced. It can be found on the Internet and downloaded. After that, you need to go along the specified path and move the document there. The system will ask if you want to replace the existing file. You need to agree to a full replacement and restart your computer. This should solve the problem. Now you can try to work in the program. But what if, after performing these operations, Tinyumbrella still won't start? Let's move on to the most dangerous and unpleasant moments that may occur when working with Tinyumbrella.

Lack of app performance

Let's start looking at the least common reasons that can cause today's application to fail to launch. To be honest, the scenario considered below is not considered the most dangerous. He's just not very pleasant. In addition, it can cause many failures in the operation of various utilities. The problem is that the program we are considering requires two main elements to work. First of all, this is Net.Framework, as well as a special programming environment called Oracle.

In other words, if Tinyumbrella does not start, it means that Java or Framework is simply missing on your computer. Fixing this problem is fortunately quite simple. You need to install all the listed applications on your computer. After that, it will be better to reinstall this program. Then try the program again. Everything must be fully functional. Unless you run into some of the most annoying and really hard to fix problems. What can they be? Let's try to find out.

Incompatibility

To begin with, let's start considering the most unpleasant moments that may apply to today's issue. The problem is that Tinyumbrella may not start due to incompatibility with the version of the Windows operating system. Sounds too intimidating. To be successful, you will have to completely reinstall the Windows operating system to a version that this program is compatible with. This can sometimes be a big problem. But not in all cases. If you were already planning to reinstall the operating system, then you should not worry. If these are unforeseen circumstances, then it is better either not to use the utility or to save all important information on removable media before starting the operation.

Pirated version

Another dangerous moment that can manifest itself is when Tinyumbrella does not start due to the use of a pirated version of the operating system. In this case, you may have problems not only with this application, but with many. Pirated programs guarantee the appearance of numerous malfunctions and failures. Most users today, unfortunately, prefer to use pirated versions of programs. If the Tinyumbrella utility does not start and you are using a pirated version of the operating system, then this situation should not be surprising.

It can be corrected in two ways. The first method is to reinstall the existing operating system. It's not the best choice, and it works this method rare enough. The second option may be to purchase a licensed version of the Windows operating system. This is a true and reliable option, but it also has its drawback - it is expensive. Many users try to bypass this option. If you have a lot of patience and time in reserve, you can reinstall the Tinyumbrella program itself. Perhaps the utility will start up like this from the 20th.

Viral activity

Another reason why Tinyumbrella can be broken is virus activity. All kinds of computer infection is a common problem faced by many users today. What to do in this situation? First of all, you need to check your computer for viruses. Using antivirus programs and special utilities, cure the computer and reboot. If the operation was successful, then the problem should disappear.

Conclusion

In this article, we tried to describe the reasons why Tinyumbrella may not start. Troubleshooting methods were also considered. Unfortunately, most problems can only be fixed by completely reinstalling the operating system.

Once Apple has released a new firmware, we get a period of about a week to downgrade back to the previous version. After that time, Apple stops signing the previous firmware, making it impossible to go back. The only time this window is extended is if there is the potential for a problem with the new iOS and they give users more time to go back - this is rare.

Once a firmware is no longer being signed, Apple will no longer provide the SHSH blobs for it and it is these blobs that make it possible to downgrade. A few years back, we had a tool called TinyUmbrella at our disposal to save the SHSH blobs. These blobs were then used for stitching together a pre-signed version of the relevant firmware files – these could be used over and again to downgrade to where Cydia could be installed.

The loophole that allowed SHSH blobs to be used for downgrading was closed some time ago but TinyUmbrella is still usable for saving your blobs. You might be wondering why to bother when they cant be used but there is a chance that, in the future, we will be able to use them for downgrading again and, if you don't save them, you won't have that chance .

What Can TinyUmbrella Do?

Right now, Tiny Umbrella only has the option for saving shsh blobs and storing them and it is good practice to start doing this now and every time you upgrade your iPhone or iPad. The developers of the app have already hinted that there will be an update to bring the downgrade facilities back again. It has been updated regularly through the years with support for each successful iOS release so start using it today and be prepared for the future.

Download TinyUmbrella on Windows:

How to Use :

You can find all the information with step by step guide to use the app for your iPhone or iPad in the given


Top