I will make any electronic devices to order. Electronics development and production
Microcircuits- these are devices (electronic circuits) enclosed in a small specialized case that can have arbitrarily complex functionality, up to an entire microcomputer. You can buy microcircuits in a plastic, metal or ceramic case for surface mounting or mounting into holes in a printed circuit board. The price of a microcircuit depends on its functionality. The functional purpose of the microcircuit can be determined by the markings on the case; all manufacturers mark their products with the development serial number. Based on manufacturing technology, there are several types of microcircuits: integrated circuit, film chip, hybrid chip (microassembly), mixed chip.
Based on the type of signal being processed, microcircuits are divided into 3 types:
- Analog chips. These include: voltage and current stabilizers, switching power supply control microcircuits, comparators, signal generators, signal converters, analog multipliers, analog adjustable amplifiers, filters, synchronization circuits, sensors, operational amplifiers (op-amps);
- Digital chips. These include: microcontrollers (MCU), microprocessors, memory chips, programmable logic integrated circuits (FPGAs), arithmetic logic circuits (ALUs), switches, flip-flops, registers, encoders, multiplexers, adders, counters, buffer converters, decoders, demultiplexers , half-adders, logical elements (AND, OR, NOT, NAND, NOR, etc.)
- Analog-to-digital microcircuits. These include: digital-to-analog converters (DACs), analog-to-digital converters (ADCs), transceivers, interface converters, power supply chips for electronic devices, switches, modulators, demodulators;
The most well-known brands in the field of microchip production are the following companies:
Analog Devices- takes leading positions in the development and production of: 8/32-Bit microcontrollers, signal processors, RS232/RS485/RS422 interfaces, digital isolators, touch screen controllers, ADCs, DACs, digital potentiometers, temperature sensors, acceleration sensors, gyroscopes, hall sensors , optoelectronics, operational amplifiers, supervisors, RF/IF;
STMicroelectronics- takes leading positions in the development and production of: 8/16/32-Bit microcontrollers, Flash/RAM/EPROM memory, RS232/RS485/RS422/CAN interfaces, ADC, DAC, acceleration sensors, gyroscopes, operational amplifiers, audio amplifiers, pulse voltage converters, LDO regulators, supervisors, PWM, LED drivers;
Atmel- takes leading positions in the development and production of: 8/32-Bit microcontrollers, Flash/EEPROM/SEEPROM/EPROM memory, CAN/LIN/USB interfaces, ADCs, image sensors, programmable logic, RFID;
Texas Instruments- takes leading positions in the development and production of: 16/32-Bit microcontrollers, signal processors, RS232/RS485/RS422/I2C/CAN/USB/LVDS/PCI interfaces, digital isolators, touch screen controllers, ADCs, DACs, temperature sensors, image sensors, operational amplifiers, audio amplifiers, logic ICs, switching voltage converters, LDO regulators, supervisors, ION, PWM, RF/IF, RFID, switches and drivers;
Maxim Integrated (Dallas Semiconductor)- takes leading positions in the development and production of: 8-Bit microcontrollers, RAM memory, RS232/RS485/RS422/CAN/USB/LVDS interfaces, digital isolators, touch screen controllers, ADCs, DACs, digital potentiometers, temperature sensors, operational amplifiers, comparators, pulse voltage converters, LDO regulators, supervisors, PWM, RFID, switches and drivers;
Microchip- takes leading positions in the development and production of: 8/16-Bit microcontrollers, CAN/LIN/Ethernet interfaces, touch screen controllers, ADCs, DACs, digital potentiometers, temperature sensors, operational amplifiers, switching voltage converters, LDO regulators, supervisors, PWM, RF/IF, RFID, display controllers;
NXP- takes leading positions in the development and production of: 8/16/32-Bit microcontrollers, I2C/CAN/USB interfaces, ADCs, DACs, temperature sensors, rotation angle sensors, amplifiers, LDO regulators, RFID, keys and drivers;
ON Semiconductor- takes leading positions in the development and production of: CAN interfaces, amplifiers, logic ICs, pulse voltage converters, LDO regulators, supervisors, switches and drivers;
Fairchild Semiconductor- takes leading positions in the development and production of: USB/LVDS interfaces, DACs, optocouplers, logic ICs, LDO regulators, supervisors, PWM, switches and drivers.
You can view and buy goods in our stores in the cities: Moscow, St. Petersburg, Volgograd, Voronezh, Yekaterinburg, Izhevsk, Kazan, Kaluga, Krasnodar, Krasnoyarsk, Minsk, Naberezhnye Chelny, Nizhny Novgorod, Novosibirsk, Omsk, Perm, Rostov-on-Don on-Don, Ryazan, Samara, Tver, Tomsk, Tula, Tyumen, Ufa, Chelyabinsk. Delivery of the order by mail, through the Pickpoint delivery system or through Euroset showrooms to the following cities: Tolyatti, Barnaul, Ulyanovsk, Irkutsk, Khabarovsk, Yaroslavl, Vladivostok, Makhachkala, Tomsk, Orenburg, Kemerovo, Novokuznetsk, Astrakhan, Penza, Lipetsk, Kirov, Cheboksary, Kaliningrad, Kursk, Ulan-Ude, Stavropol, Sochi, Ivanovo, Bryansk, Belgorod, Surgut, Vladimir, Nizhny Tagil, Arkhangelsk, Chita, Smolensk, Kurgan, Orel, Vladikavkaz, Grozny, Murmansk, Tambov, Petrozavodsk, Kostroma, Nizhnevartovsk , Novorossiysk, Yoshkar-Ola, etc.
You can buy products from the “Microcircuits” group wholesale and retail.
Single and double sided printed circuit boardsPP type | Preparation | up to 20 dm² | up to 50 dm² | up to 100 dm² | up to 200 dm² | over 200 dm² |
AKI | 950,00 | 165,00 | 150,00 | 135,00 | 125,00 | 120,00 |
OPP+M | 1 300,00 | 180,00 | 165,00 | 140,00 | 130,00 | 125,00 |
OPP+M+Sh | 1 600,00 | 195,00 | 175,00 | 150,00 | 135,00 | 130,00 |
AL AKI | 1 600,00 | 280,00 | 250,00 | 200,00 | 185,00 | 175,00 |
DPP | 1 400,00 | 210,00 | 190,00 | 160,00 | 155,00 | 150,00 |
DPP+M | 1 900,00 | 235,00 | 210,00 | 175,00 | 165,00 | 160,00 |
DPP+M+Sh | 2 300,00 | 245,00 | 230,00 | 185,00 | 175,00 | 165,00 |
DPP+M+2SH | 2 600,00 | 265,00 | 240,00 | 195,00 | 180,00 | 170,00 |
Production time:
- Urgent - from 2 working days (K = 2.0)
- Superexpress - from 1 working day (K = 3.0)
- Standard - 14 working days
Multilayer PCBs
PP type | Preparation | up to 20 dm² | up to 50 dm² | up to 100 dm² | up to 200 dm² | over 200 dm² |
4PP | 3 000,00 | 470,00 | 400,00 | 330,00 | 270,00 | 260,00 |
6PP | 3 700,00 | 640,00 | 500,00 | 445,00 | 395,00 | 385,00 |
8PP | 4 400,00 | 820,00 | 670,00 | 600,00 | 520,00 | 505,00 |
10PP | 5 500,00 | 1 090,00 | 935,00 | 845,00 | 780,00 | 760,00 |
12PP | 6 100,00 | 1 320,00 | 1 150,00 | 1 000,00 | 905,00 | 875,00 |
14PP | 6 700,00 | 1 545,00 | 1 350,00 | 1 180,00 | 1 070,00 | 1 020,00 |
16PP | 7 300,00 | 1 780,00 | 1 575,00 | 1 380,00 | 1 250,00 | 1 180,00 |
18PP or more | on request |
Prices are indicated in rubles including VAT for standard production times
Production time:
- Urgent - from 5 working days (K = 2.0)
- Superexpress - from 3 working days (K = 3.0)
- Standard - 18 working days
An increasing factor (K) is applied to the cost of dm2.
Attention:
- The day of order acceptance and delivery time are not taken into account in production terms
- electrical testing, non-standard materials, immersion finishing coatings increase production time (only for urgent orders)
- the minimum order in the presence of non-standard parameters is one standard technological workpiece (~8 dm² for OPP/DPP, ~4 dm² for MPP). Non-standard parameters mean non-standard type and thickness of material, non-standard thickness of copper foil, non-standard mask color, MPP with a non-standard structure, etc.
- For orders placed via email: orders of printed circuit boards with a volume of up to 20 dm², carried out at an urgent / super urgent rate, are put into production automatically before payment is received, unless otherwise indicated in your written application. All other orders are put into production after 100% payment.
Additional charges:
Finish coating
A multiplying factor for urgency is applied. Prices are indicated in rubles including VAT.
Custom PCBs (on request)
Materials are available in our warehouse.Advanced boards
Coefficient = 1.5 to the cost of preparation and dm2:Additional services
Electrical testing | OPP and DPP up to accuracy class 5 40.00 RUR/dm² for MPP and advanced boards included in the price |
Slat coating | Au - 0.30 rub./mm², Ni - 0.05 rub./mm² |
Machining of piece printed circuit boards with an area of less than 0.3 dm² | less than 0.05 dm² (minimum 0.0025 dm²): coefficient = 4 from 0.05 to 0.1 dm²: coefficient = 2 from 0.1 to 0.2 dm²: coefficient = 1.5 from 0.2 to 0.3 dm²: coefficient = 1.2 |
Printed circuit boards with high drilling density, complex and labor-intensive milling, and deviations from the standard routing | on request |
Black marking according to GOST | 25 rub./payment |
No defective boards allowed on the panel (No X-out) | coefficient = 1.1 |
Inadmissibility of repairs on printed circuit boards | coefficient = 1.2 |
Combining various printed circuit boards into a set. | on request |
Work with Design Documentation (CD according to ESKD) and other documents in addition to the order card | on request |
Attention!
As of August 1, 2019, the increasing factor for the cost of manufacturing sets of printed circuit boards has been cancelled. Please note that the requirements for the design of kits have changed ( , )
Non-standard materials
Special abilities
Delivery
- in Moscow and St. Petersburg - 450 rub.
- to any region of Russia depends on the selected transport company, the distance of the recipient and the weight of the cargo
Large batches of printed circuit boards
PP type | Preparation | Cost per dm² | ||
OPP+M | 50,00 | 2,20 | 2,00 | on request |
DPP+M | 100,00 | 2,60 | 2,50 | on request |
4PP | 200,00 | 5,80 | 4,20 | on request |
6PP | 300,00 | 7,00 | 5,80 | on request |
8PP | 400,00 | 8,00 | 7,10 | on request |
* prices are indicated in USD in view of VAT.
1 USD equal to the US dollar at the exchange rate of the Central Bank of the Russian Federation on the day of invoice.
Production time - from 3 weeks.
Additional charges:
- Making a stamp
- Making an adapter for electrical testing
- Non-standard finishing coatings
- Non-standard thickness of fiberglass
- Custom copper foil thickness
- Boards on non-standard materials
- Highly complex printed circuit boards
- MPP with a non-standard structure, with blind and hidden transitions
Prices for large series of printed circuit boards with a volume of over 500 dm2, as well as prices for printed circuit boards with a metal base are available on request.
Contract manufacturing
Installation time
Rate | Surface or output |
Superficial + output |
Boosting coefficient |
standard | from 6 working days | from 12 working days | No |
urgent | from 3 working days | from 6 working days | 1,5 |
super urgent | from 2 working days | from 4 working days | 2,0 |
*the day of order acceptance and delivery time are not taken into account in production terms
Installation of prototypes and medium series
Preparation for production - 3,500 rub.
* prices are indicated in rubles including VAT for standard installation times
** installation of each side of the printed circuit board is calculated as a separate order
BGA installation
Quantity | up to 10 pcs. | up to 20 pcs. | up to 50 pcs. | up to 100 pcs. | more than 100 pcs. |
1.27-1.0 mm | 600 | 510 | 450 | 360 | on request |
0.8 mm | 750 | 660 | 600 | 510 | on request |
0.5 mm | 800 | 750 | 650 | 550 | on request |
0.4 mm* | 1400 | on request | on request | on request | on request |
*
with mandatory x-ray control.
Mounting QFN, LGA, DFN... (only for manual SMT installation)
** prices are indicated in rubles including VAT for standard installation times
***prices include the cost of consumables.
Additional charge
- cleaning boards from flux residues
- separation of boards after installation
- lead-free installation
- installation of circuit boards of complex shapes and rigid-flex printed circuit boards
Automatic installation
- automatic installation - from 10 kopecks. per soldering point
- output installation - from 1 rub. 30 kopecks per soldering point
- terms - from 4 working days
* prices are indicated in rubles including VAT
Additional services
- moisture protection and filling (varnish, compound, etc.)
- assembly
- programming, setup and adjustment
Full cycle of contract manufacturing
The REZONIT group of companies offers its customers a full cycle of electronics production. Large-scale production, including the manufacture of circuit boards and the supply of components, installation and assembly, configuration and testing, packaging and delivery to the client’s or end-user’s warehouse.
Special offer when ordering a full cycle of serial* production:
- preparation of PP production - for free
- preparation of installation production - for free
- stencils for installation - for free
- delivery - for free
* large series from 1.0 million soldering points
Stencils for SMT installation
(download price)Specialized stainless steel made in Japan and England.
Available thicknesses: 80, 100, 120, 130, 150, 200 and 300 microns
Standard size | Preparation | Price per aperture | ||||
Req. Treatment | Ready for cutting | up to 2000 | 2001-3000 | 3001-5000 | more than 5000 | |
300 x 300 | 2,000 rub. | 1,500 rub. | 3.00 rub. | 2.80 rub. | 2.60 rub. | 2.50 rub. |
400 x 500 | 2,500 rub. | 2,000 rub. | 3.00 rub. | 2.80 rub. | 2.60 rub. | 2.50 rub. |
600 x 600 | 3,000 rub. | 2,500 rub. | 2.50 rub. | 2.30 rub. | 2.15 rub. | 2.00 rub. |
600 x 800 | RUB 3,500 | 3,000 rub. | 2.50 rub. | 2.30 rub. | 2.15 rub. | 2.00 rub. |
* Prices are indicated in rubles including VAT.
** The price includes the cost of material, preparation of files, generation of programs for the machine, AOI, packaging
Production time – 1 working day
The day of order acceptance and delivery time are not taken into account in production times.
Urgent production – 6 hours (coefficient - 2)
- A stencil design is considered ready for cutting if it is sent in the form of a gerber file (view from the squeegee side), which has apertures, a frame, fiducial marks and text engraving (if required), and in which nothing needs to be changed. In this case a discount is provided 500 rubles for preparation of production.
- Preparing the production of stencils of various boards placed on one sheet - 300 rubles for each association.
Solder paste
(download price)Lead-free no-clean solder pastes
Water-washable solder pastes
* Prices are indicated in USD. in view of VAT.
1 USD = US dollar at the Central Bank exchange rate on the day of invoice
Packaging in 500 g cans.
Solder
All prices are indicated in rubles including VAT.
Production: France, Netherlands.
Technical design
Development of housings for electronic devices, mechanics.
We offer
- Controllers for controlling electric drives, lighting, decorative LED displays, equipment, processes.
- Power supplies, power conversion technology.
- GSM / GPRS controllers, remote control, dispatching.
- Telephony, intercoms, audio and video transmission.
- Battery-powered devices based on micro-consuming components with autonomous operation up to 10 years.
- Works with SD, USB, RS485 interfaces.
- Wireless data transmission Bluetooth, Wi-Fi, 433MHz.
- Development of own lines and data transmission protocols.
- Recognition of movements and gestures, inertial navigation, determination of position in space, GPS / GLONASS.
Possibilities
- Development of printed circuit boards.
- Software development for microcontrollers.
- Case development, technical design, ergonomics.
- Design of mechanical components, electromechanical drives.
- Creation of applications for Windows, Android, iOS.
- Production from single copies to series.
Make an order
- Send a detailed description of the task via email.
- During the working day you will receive advice and clarifying questions.
- After approval, a commercial offer will be prepared for you.
- The agreement is concluded with individuals or legal entities.
- Payment is made by bank transfer.
Helpful information
- If you are faced with the need to develop an electronic device for the first time, we recommend that you familiarize yourself with the general plan for drawing up technical requirements.
- If you are a professional and you often have to formulate engineering problems for other people, then this short one will be useful for you.
Our advantages
- Individual approach to each client.
We study the task in many ways, develop technical specifications, and offer optimal solutions based on the customer’s priorities and the capabilities of modern technology.
- Supply of turnkey equipment
From the initial idea to the production of a series with instructions for installation/installation and use.
- Modern element base.
The use of modern element base makes it possible to reduce dimensions, reduce the number of elements and soldering points, and reduce energy consumption.
- Technological printed circuit boards.
Development and production of printed circuit boards using the most modern technologies: multilayer, rigid-flex, dense double-sided mounting, complex geometry.
- Production.
Own assembly production. Quality control of components at the input.
- Product support.
Warranty and post-warranty service, support throughout the entire life of the project.
Gallery of developments, solutions, technologies used
Desktop electronic device housing. Minimalistic design, white matte plastic. Design optimized for silicone molding
Mechanical driven electronic device
Electronic device with electromechanical drive. Dense arrangement of electronics and mechanical parts.
- Power: 4 AA batteries.
3D rendering of a multilayer printed circuit board
3D rendering of a multi-layer printed circuit board with a dense layout. Shown: arrangement of elements on the top layer, structure of the conductors on the top layer, internal structure of the conductors and plated vias.
- 6 layers;
- Total thickness 1.0mm;
- Conductor thickness 0.1mm;
- Hole diameter 0.2mm;
- Elements in housings 0402, SOT-666;
- Double-sided installation;
Printed circuit board with complex geometry and dense layout. Designed for use as part of a wearable device with high miniaturization requirements.
Housing and printed circuit board of a hand-held measuring instrument.
- Power: 1 AA battery.
- Control: 32-bit processor.
- Data transfer: Bluetooth.
Instrument panel and controls for the device in a metal case. Laser engraving on stainless steel, vandal-proof metal buttons, LED indicators are hidden in tinted glass.
Designed for long-term (more than a year) battery-powered operation. The battery on the board is used to keep the clock running when the battery is replaced. Two power inputs are designed to connect two batteries, the main external one and another backup one located inside the sealed case of the device. Most of the time the device is in sleep mode with a current consumption of 30 μA. Once a day it registers in the GSM network and transmits data. A microSD memory card is used to record data in sleep mode. Has analog inputs, logical inputs and outputs, power output 12V 1A.
Load management by receiving commands in the form of SMS messages. Collection of information from 4 ADC lines. The module is designed for installation in a sealed housing of IP65 standard in accordance with GOST 14254 with mounting inside the housing on a rubber chassis in order to increase vibration resistance.
- Outputs: 3 electromagnetic relays 4 A.
- Inputs: 4 ADC lines 10 bits.
- Power supply 12 V 5 mA.
Body and circuit board of the wearable device
Layout of the printed circuit board and body of the hand-held device. Case material: aluminum, 3-axis CNC milling, anodizing.
Structural elements of a device with an electromechanical lock: printed circuit board, electric drive, spring pusher.
- 8 independent inputs for connecting IR motion sensors and smoke fire detectors;
- 4 relay outputs;
- 433 MHz radio module for working with a radio key fob;
- accelerometer for recording a blow to the body;
- built-in battery;
- input line status indicators: normal/sensor response/line break;
- battery charge indicator;
- GSM signal level indicator;
- microphone;
- power output 12V 1A.
All functions are programmed when the alarm system is connected to a computer via a USB interface or SMS messages.