On-board computer on the vaz 2110 trip computer. On-board computer "Trip Computer"

When they released, and even more so, they designed the VAZ 2110 car, they hardly thought that someone would live to the moment when the on-board computer in the car would be more important than a jack or mount. It turned out to be more important. Because a lot of useful devices can be introduced into the engine control system of a car, even if not the freshest, and the systems themselves are simply subject to replacement. And you can manage and control all this economy only with the help of the correct on-board computer.

Why do you need an on-board computer

Those who drive a dozen, of course, do not often encounter breakdowns of electronic systems due to their banal absence. But as soon as any of them fails - sentry. You need to go to the shaman for computer diagnostics, look into his mouth and pay a lot of money for which are completely free of charge using the on-board computer.

If the on-board computer on the VAZ 2110, the price of which is not higher than 6-7 thousand, was installed on the car initially, a lot of problems with electronics and error detection in all car systems would disappear forever, or at least for a long time. But only on a few dozens they installed a miserable device that showed fuel consumption and air temperature and was called a trip computer. Looking into the interior of the cheapest sedan produced in 2010, even Korean, and there you can see a neat display, albeit a simple but full-fledged on-board computer, not to mention modern models in which BC work wonders.

Computer for VAZ 2110

Only now the top ten can be modernized and instead of turning its interior into a nomadic exposition of the life of Yakut reindeer herders, you can buy an excellent on-board computer with the money saved on carbon film, which you can install yourself. The price of such pleasure for 2016 is about 10 thousand. There are models that are much more expensive, and a little cheaper, but it will be a full-fledged assistant on the road and in car maintenance.

On-board computer- this is a tricky contraption that connects to the connector of the electronic control unit and displays a lot of useful information on a beautiful display:

• the remaining fuel in the tank;
• approximate mileage on this fuel;
• readings of the mass air flow sensor;
• instantaneous fuel consumption;
• service functions;
• speed modes of the car, and this, in turn, can give a lot more functions and show a lot more information.

However, it all depends on the computer model. And you need to understand that the readings of each of the sensors, no matter how many of them are in the car, will be displayed in a convenient form on the display. We must not forget about the error codes that plunge into a stupor people who are little familiar with electronics. The computer will cope with them jokingly, without requiring any special knowledge from the user. Only the ability to read and think.

Types of on-board computers VAZ

There are two types of on-board computers: universal and individual. Universal devices, as a rule, are simple and unpretentious, they can be used in almost any car where there is a minimum of electronics. An individual BC has already been developed taking into account the features and location in a particular model and will be sharpened for accurate work only with this model, but it will be very correct to read the readings and display them as accurately as possible on the display.

Simple universal devices can be designed in the form of a rear-view mirror and display the minimum necessary information. Individual devices are made strictly in size in the center console or can be sold complete with a dashboard.

Models and prices for BC VAZ 2110

The simplest BC Staff KP 001 costs 5800 rubles and is made together with a digital instrument panel. Installation and adjustment of the device is extremely simple, as well as the functions that it has. In addition to those that we have listed, the State allows you to perform plasma drying of candles, makes reminders of the terms of maintenance, and some other simple tasks.

The Gamma GF 312 series computers are also quite popular with owners of dozens. It already resembles a modern computer, although the graphics quality is monochrome. Despite this, the device gives out a lot of information - from the simplest ones, clocks, thermometers and alarm clocks, to a fairly wide diagnostic center and a multifunctional trip computer and gives information about engine operating modes.

The device diagnoses almost all nodes in which there are sensors - this is the ignition system, injection system, throttle valve, in a word, all parameters plus error codes will be given to the driver, after which the errors can be erased and the Check Engine lamp will leave you alone for a long time.

Having spent a very small amount and at most half an hour of time to install and configure the device, everyone will be able to keep abreast of their car in real time and in diagnostic mode. Good luck and safe travels to all!

On-board computer for VAZ 2110 - price

Hi all. When buying a car, the former owner gave me a bag with a service book and an instruction manual. Upon arrival home, I threw this package into the nightstand and didn’t even look at what was there and how, somehow I didn’t need it. And the other day I came across the same bag and decided to still see its presence! Honestly, it was interesting to learn about the life of a car in its first kilometers of operation. And in the instruction manual I came across a description of the on-board computer that was installed on the car in my configuration. I think when buying a used car, not everyone gets this documentation, and sometimes questions arise, but how to set up an on-board vehicle? You can use the "poke" method or google the Internet. There are also many varieties of on-board computers, both those that were installed from the factory and those that you can additionally install yourself. Therefore, I decided to throw off the instructions, maybe this information will help someone with the same on-board computer.

A trip computer (MK) is installed in a variant version instead of a clock. MK has 15 functions divided into 3 groups. Group selection
carried out with buttons 1, 2 and 3.

In each group, the functions are divided into basic and additional. The main functions are cycled through the ring with buttons 1, 2 and 3. Additional functions are cycled through with button 5. When the ignition is off, the computer is always in the "Current time" mode.
When the battery is removed, the clock and all accumulated parameters are stored for at least 1 month.
ADJUSTING THE COMPUTER FUNCTION
Clock correction
Press button 4 in the "Current time" mode.
On the sixth signal of the exact time, press button 1, this resets the seconds and rounds the clock.

Setting the current time (calendar)
Press button 4 in the "Current time" ("calendar") mode.
Use buttons 5, 6 to set the desired hour (day) value.
Press button 4.
Use buttons 5, 6 to set the desired value of minutes (month).
Press button 4 to finish setting the time (calendar).

Setting an alarm

Use buttons 5, 6 to set the desired hour value.
Press button 4.
Use buttons 5, 6 to set the desired value of minutes.
Press button 4 to complete the alarm setting. In Timekeeping Mode, the alarm symbol will light up (alarm is on).

Turn off the alarm
Press button 4 in "Alarm clock" mode.
Press button 1 to turn off the alarm. “--.--” will appear in the digital digits, and in the “Current Time” mode, the alarm symbol will not glow (the alarm is off).

Adjusting the brightness of the indicator backlight
When the parking lights are on, the backlight level is adjusted using the instrument scale illumination regulator.
When the parking lights are off, the backlight level is adjusted programmatically:
- press button 4 in the mode "Travel time with stops". All single segments (pictograms) will be displayed on the indicator, which is a sign of the backlight level adjustment mode, and a number corresponding to the backlight level as a percentage of the maximum value will be displayed in the digital digits;
- use buttons 5, 6 to set the required level of backlight brightness;
- press button 4 to end the brightness adjustment mode.

Calibration of the fuel level sensor
To carry out the correction, it is necessary to drain all the gasoline from the tank.
Press and hold button 4 for more than 2 s in the "Fuel level" mode.
The display will show a flashing "0".
Press and hold button 3 for 1 s until the sound signal confirmation. After that, the flashing number "3" will appear on the indicator.
Pour 3 liters of gasoline into the gas tank using a measuring container, wait for the time necessary for the fuel level sensor to calm down, press and hold button 3 for 1 s until a confirmation sound appears.
Continue this procedure up to the maximum value of 39 liters, after which the computer automatically exits the mode.

Installation of an overspeed warning device
Press button 4 in the "Medium speed" mode.
Use buttons 5, 6 to set the required speed threshold.
Press button 4 to exit the overspeed alarm setting.

The on-board computer of the VAZ 2110 injector is necessary when there are problems in the operation of the car. It is with its help that you can quickly and easily determine what is the cause of the injector problems.
The on-board computer on the VAZ 2110 is a device that greatly facilitates driving a vehicle, but like any system it has its drawbacks and advantages, which will be discussed below.

Differences between an injector and a carburetor

In fact, the injector is practically no different from the carburetor. They have almost the same design.
However, if you assume that replacing the carburetor with an injector will not bring any benefit, then this is not so.
Consider the advantages of the injector:

• If there are any problems in the car, then it will be possible to find them in just a few minutes.

Note: nevertheless, you will have to go to a car service, where specialists will diagnose the condition of the car through.

• Even on idling the engine runs as it should. And in winter, you can start a car without problems, without preheating the engine.
• In general, the car drives much better. At the same time, it spends much less fuel when compared with a carburetor model.
• The carburetor should be cleaned and adjusted periodically, while the injector requires almost no intervention.

Note: Injector parts cost a little more than carburetor parts, but the injector breaks much less often. It is enough to follow the rules of operation of the car.

Usually a new injector (see) works long time. And even if it breaks down for some reason, it can be taken to a car dealership where repairs will be made free of charge, as it will be under warranty.
If a sensor is broken, then it can be replaced in a matter of seconds. And yes, these parts are cheap.

Disadvantages of the injector

The main disadvantages of the injector include:

• Catalyst, which is located at a distance of 0.1 m above the ground.

Note: therefore, you need to drive a car very carefully, as the catalyst can be easily damaged. This situation is especially possible when driving on rough roads. Besides, it costs a lot.

• Since the old model engine installed on the VAZ 2110 is not designed for an injector, it is very difficult to get to some of its parts.

How to drive a car with an injector

You can give a few important tips for the operation of a car with an injector:

• Maintenance needs to be done on time.
• Refuel the car only with the recommended fuel from the manufacturer.
• Soundproofing is necessary, as the injector works quite loudly.
• The body should be treated with anticorrosive.

Note: processing is necessary so that the body does not corrode.

Advantages of the on-board computer

The on-board computer of the injector is able to independently check the condition of the car.
Many install it on their car, because:

• ​ It shows the correct one, so the driver can always know when he needs to fill up the car.
• There is a voltmeter and a tachometer.
• The oil change reminder function works.

Note: it costs no more than 2000 rubles, but it performs a lot of useful actions.

Problems reported by the computer:

• ​ During the operation of the car, the following problems may occur: a light may come on, indicating a malfunction in the engine (but the computer is working normally).

Note: It is possible that this light comes on due to a small short circuit, so it is not advisable to drive to a car service every time it is on. Diagnostics is not cheap.

• The car is using too much fuel. Sometimes even more than the maximum limit of 12 liters can be spent per hundred.
  In this case, only the firmware of the controller will help. This process is best entrusted only to highly qualified specialists, as it must be performed correctly.

Installation

Before starting the installation of the on-board computer, you should pay attention to the connection diagram.
Its installation takes place in several main stages:

• Remove the terminal coming from the battery.
• Find the block for turning on the alarm (see) and get it. It is to it that the on-board computer will be connected.
• Remove the orange wire from the seventh contact.
• In its place, fix the red and white wiring pulled out of the on-board computer harness.
• ​ Disconnect the orange wire and install it in the connector from which the wire was previously removed.
• Disconnect the red wire with black stripes from the tenth contact. Install the red wire from the harness here. And in place of red, connect red-black. That is, the wires need to be swapped.
• Disconnect the black wire from the fifth contact. Connect the black wire from the harness to it.
• Connect the black wire of the block here.
• Remove the white wire from the eighth pin and connect the white wire from the harness to this connector. And vice versa.

Note: there must be contact between the wires.

• Now you should check if the wires are well fixed. The place of their twisting should be isolated with insulating tape.
• Through the inside of the console, the harness must be pulled to the installation site of the on-board computer.
• Connect it to the sensor that regulates the fuel level in the car.
• ​ Remove the instrument panel, gaining access to the gray block.
• Disconnect the fuse box.

Note: it is mounted to the left of the driver.

• From the gray block, you need to pull out the pink wire, which gives a signal to the fuel sensor. You need to connect a pink bundled wire to it.
• Install on-board computer.
• Turn on the ignition and check how it works.

Our instructions will help you easily install the on-board computer on the car with your own hands. The approximate price of the on-board computer ranges from 2000 rubles.
For the work of a car mechanic, you will need to pay another 2,000 rubles. Therefore, you can save money by doing all the work yourself.
Before starting work, you should consider photos and videos on a given topic.

The modern equipment of the VAZ 2110 car differs from previous generations by the presence of many electronic devices integrated into general scheme automatic interaction, management and control. The on-board computer plays the main role in this ACS, with the help of which the correct operation of all these gadgets becomes under control.

Types of on-board computers

The regular on-board computer "dozens" (aka the route BC) is a special electronic device that serves as the main expert in assessing the correct operation of car electronics.

1. BC with installation on cars with a carburetor-type fuel system.
2. BC with installation on vehicles with an injection type fuel system.

In the first case, the choice of such BCs in the automotive market is small, they are limited to a limited set of functions. In the second case, such bookmakers are widely represented in their assortment with extended functionality.

BCs are also subdivided into products:

• universal type for installation on any vehicle, incl. and on the VAZ 2110. Such "station wagons" are mounted either on the front glass or on the rear mirror bracket.
• typical, representing electronic - on-board devices (ECU), designed for a specific type of car.

Which on-board computer to buy

It is difficult to answer such a question unequivocally, it all depends on what tasks the motorist wants to solve with the purchase of such a device as the BK VAZ 2110, the price of which varies from the number of functions given.

If you have a small amount for the purchase of this product, you can purchase a budget BC with limited diagnostic functionality, i.e. it will fulfill its main purpose. If it is possible to purchase a multifunctional gadget with subsequent installation in the dashboard and service functions, then it will justify its purpose, and a number of attached options, for example, drying spark plugs, are very useful in the low temperature season.

When choosing an on-board computer for the VAZ 2110, you should decide:

1. For what purposes it is acquired and the degree of prospective involvement of all its functions.
2. With the price of the product, because such a gadget for the “tens” costs from 3 to 5 thousand rubles.
3. With the place of its planned deployment
4. With monitor parameters, such as: color, contrast, functionality in low temperature mode.
5. With features.
6. With the possibility of additional services.
7. With software replacement options.

On-board computer "tens"

• determines the error code in the electronic system of the vehicle;
• in the presence of the necessary detector, takes readings of the street temperature regime;
• functions in the mode of providing the necessary information (data on fuel consumption, the state of fuel reserves, speed of movement, distance from the fuel supply, and other data are displayed).

In a VAZ 2110 car, the standard type on-board computer is installed in the place on the front panel where the chronometer was previously installed. It is a monitor with a side arrangement of three buttons vertically, to the left and right of the screen.

Button functionality

Left row:

1. Svepxy - with alternate pressure they show:

• real time;
• timer (when installed);
• car driving time.

2. Center:

• fuel online;
• average fuel consumption;
• total fuel consumption.

3. Bottom:

• average speed of movement of the car;
• mileage before running out of fuel;
• outside temperature.

Right row:

1. Top:

• Clicking resets previous views.

2. Center (function selection):

• we determine the function and press the button, while the BK works in the “installation” segment, which is carried out using the button below;
• to exit this mode, press the button again and hold for about a second.

3. Bottom (parameter change):

• when pressed, the parameters increase by one value;
• when it is held down, the parameter increase mode starts in a flashing format;
• when pressed twice for a second and then held, the parameters are displayed in the parameter reduction mode in a flashing format.

Shuttle bus "ORION-BK"

The Orion on-board computer for the VAZ 2110 is an automated hardware-software complex that performs the following functions:

• generalizes information from different detectors;
• analyzes the received data;
• transmits to the monitor online the parameters of the main systems of the car;
• gives the necessary advice.

Almost 30 complete sets of BC are operated under the Orion BK brand. Which of them can be installed in the VAZ 2110?

BK-03 is designed for operation in units with a carburetor fuel supply system and is equipped with the following functions:

• timer;
• tachometer;
• control over the voltage of the auto network;
• battery parameters;
• temporary reader.

BK-06 is a modernized BK-03 with the function of having a device for measuring temperature. BK-11 is used to operate the "ten" with a carburetor engine. BK-05 should be installed in a VAZ 2110 car with an injection-type power plant and an ECU.

What is he capable of? What features does it have? What possibilities does it have? Can it diagnose the car system? Can it show outdoor temperature, etc.?

You bought a VAZ 2110 with a standard on-board computer and you probably have the questions mentioned above. The answers to them can be found in the book on the operation of the car. But…

1. Either slobs work in the service who did not issue this book.

2. Either you bought a car from your hands, and the previous owner lost this book.

That is why we decided to write this article for you.

Can the BC show the outside air temperature?

Maybe if there is an appropriate sensor. They just don't install it at the factory. So you have to set it yourself.

Does it diagnose the car system?

The regular BC does not switch to the VAZ 2110 with steering column shift. Why?

Most likely the casing clamped the wiring going to the switch. Erase it protective layer, and so it closes. It needs to be inspected and corrected.

Often other strange things happen to the VAZ 2110 on-board computer. For example, it shows increased fuel consumption. Or, on the contrary, it does not show the average and instantaneous consumption, speed, etc. Sometimes it beeps because it thinks there is no fuel in the tank even though you know the tank is almost full.

And if you are satisfied with the factory, then below you will find its description.