The title page of the message is a sample for the school. Cover page sample message

Friends, good time days. In any educational institution, students are given such tasks -. And today we will talk about how to arrange the title page of an essay in schools and universities. Since many students face this problem.

We will help you write any academic paper

After all, the following depends on the correct and high-quality design of the title page:

• Firstly, the title page is the face of the abstract, your work. It immediately shows how responsible you were for the task.
• Secondly, the teacher, looking at the title page, determines how well the work is framed and evaluates it.

What is an abstract title page

Title page is the very first page in academic work. It indicates the names of the department, strange, full name of the student and teacher. The title page is drawn up in most cases by GOST standards, but this also happens. that university teachers are replacing these rules with a well-thought-out training manual.

In general, for the design of the title page, they adhere to the 2 main state standards:

1. "Research report" - GOST 7.32-2001, which describes the main requirements very well, which should be located on the title page.
2. "ESKD" - GOST 2.105-95 - general requirements for any text document.

Rules for the design of the title page of the abstract

Although teachers may require the student to adhere to the manual. However, there are rules that cannot be avoided. But it is better to find out the various nuances at the department in advance.

The title page of the abstract according to GOST includes the following parameters:

• Not always, but the name of the country is written
• Department name (abbreviated or full, ask the reviewer)
• Name of discipline
• Subject scientific work
• Full name, course, group number
• Full name of the host, his position
• author
• What city does the author live in?
• What year was the document completed?

You need to remember the following, the title page is not numbered. I wrote about almost all versions of numbering.

Also, the GOST does not indicate the font, and therefore the teachers ask - Times New Roman, 14 pins.

Correct design of the title page of the abstract in the Word according to GOST 2017-2018

1. In the center of the sheet, including caps lock, the name of the department or ministry of your educational institution is written. For convenience, use Caps Lock.
2. Next write the name educational institution, full or short, while respecting the single line spacing.
3. Below in quotation marks - the name of the department
4. In capital letters, in the middle of the sheet, they write in a font of 16-20 kegel in size - “Abstract”
5. Then the subject on which the essay is being written and the topic
6. Then, to the right of the center, the full data of the author and the verifier are written
7. AND final stage- at the bottom of the page in the center of the city and year

Essay title page sample for students

As mentioned above, the title pages of the abstract may differ depending on the educational institution. Some require adherence to GOST standards, while others require manuals.

Requirements for the title page of the abstract in schools

Just like in universities, in schools, children are also asked different kinds tasks such as reports, abstracts. And many students want to get an excellent grade from work. And therefore, the question of how to make the title page correctly is of interest to almost any student. Let's highlight the main requirements:

1. School name in full
2. What kind of work (abstract, report, etc.)
3. Subject of work (not compulsory in elementary school)
4. Theme and name of the project
5. Student's last name and class
6. Surname of the checking teacher (also not required in elementary school)
7. City (town) and date

Rules and an example of the design of the title page of the abstract for the school

Settings in Word

• Indents: right - 10 mm, left - 30 mm, top and bottom - 20 mm each
• The font of the title page of the abstract is Times New Roman, 14 pt, the name of the educational institution is 12 pt, the name of the project is 28 pt and bold, the title of the work is 16 pt and bold
• Sheet A4

Sample

In general, the report is not difficult to write and format, it is more difficult to deliver a report well in front of a class or audience.

When making title page school report strict style should be followed. It is preferable to use classic colors: black font on a white background.

If the printed pages of the report are bound on the left side, then when designing the title page, you must leave the space intended for the binder - a field of 3.5 cm.

The preferred line spacing is 1.5, the font is Times New Roman.

Title cap

At the very top of the first page should be written the name of the parent educational organization. The next line is the name of the school of the student making the report.

Type and topic of work

In the middle of the title page is the name of the type of scientific work being performed - in this case this is a report. The topic of the report is written below.

The topic must be well defined. If possible, it should define the specific boundaries of a given topic, its clarification. It is advisable to avoid such formulations as: “The work of A.P. Chekhov”, “Animal and plant world of Eurasia”, “ water world". It is impossible to cover such topics in one report, so it is worth concretizing them: consider some works by A.P. Chekhov, certain groups of animals or plants of Eurasia, the most large seas in the world or Interesting Facts about aquatic animals.

The font in which the word "Report" is written on the title page may be larger than the font of the rest of the text. When writing a topic, it is customary to use a smaller font.

Specify the type of work “Report” and write the topic

Regalia of student and teacher

Below the title of the topic, on the right side of the sheet, the full name is written. student and his class. The next line - full name. teacher who will check the report.

City and year of writing

At the bottom of the title page is the name of the place ( locality) the student and the year in which the report was prepared.

Summing up

Proper design of any scientific work, including a report, allows you to strengthen the overall positive impression of the work and increase the rating. In the article, we analyzed in detail each element of the title page of the report. In order not to prescribe all the fields again, download the finished sample:

How to design a cover page for a report at school if you don't know how to do it updated: February 15, 2019 by: Scientific Articles.Ru

Reports and abstracts are one of the ways to test the knowledge of students of universities and schools. In addition, some researchers. The main purpose of such work is a brief, but quite complete in meaning, presentation of the material on any topic. In this article, we will tell you how to properly format the title page of the report, since any teacher will evaluate the student's knowledge, starting from the very first page of his work.

Title page structure

This page is the first sheet of the document, which displays the main information regarding the submitted work. The title page format is standard - A4, its structure can be divided into 4 blocks:

• The upper block contains information about the educational institution to which the student or researcher belongs.
• The central part of the page - here the name of the document and its subject are presented.
• Lower right quadrant - in this zone all the main details are indicated:
  • Name of the person who wrote the work;
  • a student's course of study or an employee's scientific degree;
  • surname and initials of the leader this project, his title;
  • assessment for the work;
  • places for the signatures of the student and teacher.
• The lower block - in this part, the city in which the educational institution is located, as well as the year the document was written, is written.

How to write a title page for a report

Nowadays, when creating similar works most people use a computer. Let's take a closer look at the process of writing a title page in Microsoft Word:

• Open a blank document in the above program.
• At the top field, type the following data: the name of the parent organization, the full name of the educational institution for which this work is being written, and the name of the department to which you belong. As for the font, for this block you need to use bold Times New Roman, 14 pt.
• In the central part of the page, stepping back from the top about 1/3 of the sheet, print the word "Report" in letters of 20 pt.
• Go to the line below and write the topic of work in quotation marks. The font for this is better to choose bold and large, 16-18 point size. Remember that the topic of the work should correspond as closely as possible to the content. In addition, it is better not to use abbreviations in the title of the report, unless absolutely necessary.
• After writing the topic, indent two lines down and right-align the cursor. In this part, you need to type the following information in 12-point font:
  • your course of study or degree;
  • group;
  • surname, name and patronymic;
  • academic title of teacher or project leader;
  • his last name and initials.
• In the event that several authors were involved in writing the report, they should be listed in alphabetical order, naming the first one who will read the work in front of the audience.
• The last step is to fill the bottom block. To do this, move the cursor down, align it to the center and type the name of the locality where the institution is located.
• Step back one more line and type the year you read the document. For this part of the page, use the 12th letter size.

The entire title page should be in Times New Roman.

In conclusion, I would like to say that in addition to the rules established by the state, each specific educational institution can make its own adjustments to the design of work. In order not to be mistaken, it is best to take a sample of the title page at the department in advance or ask questions about the design directly to the teacher.

A rather large number of questions and many doubts are raised by students and students on the title page of the report (according to GOST 2017, we consider a design sample in this article). Why this particular page? Yes, because there is special attention and special requirements for it, which all must be taken into account, which is quite difficult.

Our experienced and knowledgeable authors- quickly and efficiently! Order a service!

The title page of the report according to GOST 2017 is a general theoretical sample

The first (it is also the main) page contains all the information about the student, teacher and topic. It reflects the names of: educational institution, disciplines, topics and other information. It is convenient to issue it as a separate file when the work is completely ready and no changes are expected, for example, in the title of the topic. So, the first page of the work is drawn up according to this scheme.

• "A cap". First, create the first 3-4 top rows, center aligned:

  Line 1 - MINISTRY OF EDUCATION AND SCIENCE (indicate which country. Note, capital letters);

  2 - full name of the educational institution (lowercase letters);

  3, 4 - one-spaced name of the faculty and department (also full; note that abbreviations are not allowed on this page).

• "Center". Next, we move on to creating the “central” information - the topic. Stepping back from the “header” of 8 intervals, we type the name of the type of work in capital, bold type: REPORT (if it is being prepared for a conference or symposium, indicate this data right there). And in the next line there is information about the topic of the work (its name is in capital letters, bold type).
• "Right" column. Stepping back 5 intervals, we form a left-aligned column on the right, in which we indicate:

  - in 1 line - Speaker:

  - 2nd line - Student (group, surname and initials);

  - 3 line - pass;

  - 4 line - Checked:

  - 5 line - Regalia of the teacher, his surname and initials.

• The “bottom” block is the bottommost line, centered: City and year.

The title page of the report in accordance with GOST 2017 - a general technical sample

It is assumed that the design of the work is carried out on a computer in a Microsoft Word text editor. It is convenient to issue a title in a separate file. This page has the following settings:

• centimeter "shores" (indents) along the edges: left - 3, right - 1, upper and lower - 2;
• line spacing on this page is used - single (in the text on the following pages - one and a half);
• typing in Times New Roman (size 14 is used for all pages);
• headings are not underlined, abbreviated or hyphenated (we have already noted which ones are capitalized and bolded);
• the title is not numbered, but is taken into account in total pages, counting as the first.

So, the first thing that teachers pay attention to is indentation. Since the finished report is stitched on the right side, you need to indent 3 cm here. An indent of 1 cm is set on the left, and 2 cm at the top and bottom.

There are no specific requirements for the font in GOST, but, as a rule, all data is written in Times New Roman, 14 point size. An exception may be in the upper block. We'll talk about this a little lower.

Some teachers themselves sometimes present their own rules, which should be followed.

Sometimes the supervisor asks the title of the abstract to underline or italicize. If the teacher does not set such requirements, then the usual bold font is used.

To know how to make a title page for a report, you need to familiarize yourself with GOST 7.32-2001. In it you will find not only rules, but also examples. This GOST is called the "Research Report" (R&D).

The structure of the title page of the report

As a rule, the title page of the report is the first page, where all the data of the university (name, faculty), full name of the student, teacher, name of the document, city and year of issue are indicated.

The easiest way is to divide the report into 3 parts:

• upper block;
• middle block;
• bottom block.

Each block displays the necessary information, so we will consider them separately.

Top block title page

Here is information about the institution. That is, the country, the name of the university and the department are indicated. As we see in the example, the MINISTRY OF EDUCATION AND SCIENCE of the Russian Federation is written capital letters at the top center. These words are often highlighted in 16 pt, but it is better to check with the supervisor and work according to his requirements.

The following indicates educational institution and the name of the department:

According to GOST 7.32-2001, here, in the upper block on the left, APPROVE is written and below the position, institution and surname with the initials of the person who approves the report and puts his signature, as well as the date and year of the report verification.

Title page middle block

In the center of the A4 sheet, a REPORT is written in capital letters, below the name of the discipline, and then the topic. Instead of the word “REPORT”, you can write “RESEARCH REPORT”, of course, if it corresponds to this topic. Here's what it would look like in an example:

If in doubt how to write correctly, it is better to ask the supervisor.

Title page bottom block

And the last, but no less important moment is the writing of the lower part. Here the position is written on the right, and on the left is the surname with the initials of the supervisor and the student, and a place for the signature is also left.

This is how it looks like:

At the very bottom, in the center, the city and year of the report is written:

Sample of the first page of the report (titles)

See how the completed title page for the report looks in full:

Sample of the completed title page of the report

The samples were made using GOST 7.32 - 2001, which contains examples of the design of the title pages of the R&D report. This document also states that signatures must be in black ink or ink.

Of course, if the teacher allows you to deviate from GOSTs, then the title page is made much easier. Therefore, before starting work and design, it is necessary to clarify all the nuances with your supervisor.

Template for the design of the title page of the report

Instead of a conclusion

In the article, we examined how the title page of the report is made using GOST 7.32-2001. To get a high mark not only for the presentation, but also for the design, study the relevant documents, check with the supervisor of his requirements and then you will probably get this work high score.

How to make the title page of the report correctly - complete analysis first page and sample updated: February 15, 2019 by: Scientific Articles.Ru