Birch grove with colored pencils in stages YouTube. Drawing a birch in winter in stages in kindergarten

How to draw a birch Even if you are a completely beginner artist, this will not be a problem, because you have a good and simple step by step lesson drawing from LessDraw. If you have already prepared everything you need for drawing (in our case, this is a pencil, an eraser, a simple White paper and some materials for coloring the picture, for example, paints or colored pencils), then you can safely proceed! You will definitely succeed.

First, let's draw a birch trunk, leaving some space at the top and bottom. We try to make the lines neat and beautiful, and if something doesn’t work out, we correct ourselves with an eraser. Pay attention to how slender the trunk of such a tree is like a birch, it does not at all look like a trunk, for example,. We make a smooth bend and a gradual narrowing to the top.

Now we need to add additional branches. The lower the birch branches, the longer. Notice how they curve sharply towards the tip. Add the required number of branches and at the same time make sure that even at this stage the birch tree looks harmonious.

At this stage, I make a few strokes, these will be the outlines of the crown. Next, I will erase these lines, I need them to build the shape of the crown and the overall volume.

Throughout this area from the main branches we draw additional ones. They have the shape of a wave, several branches come from one branch at once, and they are all of different lengths. As a result, you should get something like this.

Now we remove the extra lines and proceed to coloring the trunk. Distinctive feature birches are dark spots on the bark, and we definitely need to take this point into account in the drawing process. If you plan to draw a winter birch, then you can stop at this stage - it remains just to finish the bluish snow, the landscape and get rid of unnecessary strokes. We will continue to draw.

Gradually fill in birch branches. Try to draw leaves of approximately the same size, they can become only a little smaller than the standard ones towards the ends of the branches.

To draw any type of tree, we use the same type of drawing technique, which allows us to quickly and realistically depict all parts of the plant. But each type of tree has its own unique structure that distinguishes it from others. And these features must be able to convey in the drawing. In this tutorial we will show you how to draw a birch tree in watercolor step by step. Main Feature birches are straight white trunks with dark stripes, thin drooping branches and small foliage. We will draw from the picture, but if you have the opportunity, get out into the open air. After all, drawing from nature helps not only to form a vision of the color and tonality of the object, but also the ability to analyze the composition.

To draw this tree, you will need some tools:

• watercolor paints;
• palette;
• tablet;
• adhesive tape (clerical or masking);
• squirrel brushes No. 8 and 1;
• synthetic brush No. 1;
• hard pencil;
• eraser;
• watercolor paper;
• water;
• napkins.

Drawing stages

Step 1. Let's make the sketch easy, without overloading details. First, mark the horizon line. In the center we draw straight thin trunks of birches. Starting from the middle of the trunks, we create thin drooping branches. Smooth lines denote the approximate contour of the tree crown.

This sketch is enough to move on to the next step.

Step 2. With a thin brush No. 1 and sepia, we create a texture on the white birch trunks. According to the sketch, we mark the largest branches in the crown. We shade the lower part of the trunks with a denser color - gas soot.

Step 3. With medium cadmium yellow we create grass underpainting. On the wet layer of paint shade it green.

Step 4 While the paint is soaking in, mark the light parts of the crown with lemon watercolor. Let's go back to the grass and lay a mixture of green and sepia shadow falling from the trees.

Step 5. We start drawing the crowns of birches from the center, where we use rich dark shades of green. Moving to the edge of the crown, partially wash off the paint from the brush to make the tone more transparent. Also processing the edge we reduce the size of the stroke to create the effect of individual leaves.

Step 6. Gradually work on the entire surface of the tree, observing the tone sketch. We draw thin drooping branches along the edge to convey the structure of birch crowns. After we saturate the grass and falling shadows under the trees.

Step 7. In last step Let's work with splashes. Thanks to this technique of applying paint, we will create beautiful effects of small foliage along the contour of the crowns and a flowering lawn under the trees. First, we process the tops of the trees (crowns) with yellow-green watercolor.

In order to correctly and beautifully draw a birch, you need to know its features, what distinguishes it from other trees. Before proceeding, study the structure of this plant, the features of its leaves, inflorescences, shoots. Armed with this knowledge, you can easily display them in a complex in your drawing. It doesn't matter what colors you paint with. If you know what exactly you are drawing, you will certainly succeed!

Step by step drawing of a birch

• It is necessary to start the drawing by drawing auxiliary lines, which should depict the future trunk and converge at the top of the tree. It must be taken into account that these trees are quite slender, so the base of the trunk should not be too thick, in addition, this tree, as a rule, does not have pronounced bends.
• Then outline the largest branches. Usually they begin to protrude from the trunk quite high. Therefore, the segments that will be the prototype of the branches must be drawn higher.

• Draw convex and concave parts along the trunk and branches of the future tree. Then pay attention to the state of the cortex. For example, old trees have a lot of bumps, various cracks, tubercles on it, which, of course, should not be ignored in the drawing.
• Also noteworthy is the thin birch bark, which tends to peel off slightly from the trunk. Taking into account all these nuances in the figure will make it more realistic.

• Now that the main "frame" is done, start drawing young, thin shoots, the very hanging branches that many people associate this tree with. These shoots are very long, thin and flexible, so they bend under the weight of leaves, buds and inflorescences.
• If necessary, complement our birch with "earrings". In size, these decorations are approximately equal to the size of a large birch leaf. They always hang down. Usually, earrings are grouped in two or three pieces. These inflorescences form many scales. Earrings grow at the ends of long shoots.
• Start painting the leaves. In shape, they resemble an egg or rhombuses, but pointed at the end. The edges of the leaf have many notches, and on the leaf itself the axis of the cutting and several lateral grooves extending from it are clearly visible.

• When all the contours are ready, you need to move on to coloring. Remember that the bark does not have to be pure white. Its color depends mainly on lighting. For example, if you want to depict a birch tree at sunset, then the trunk will definitely have reddish and yellowish-orange hues. Spots, longitudinal stripes on the trunk should have a black-gray color. Birch leaves must be given a rich green color. Those of them that are younger have a shade close to the color of young grass, older leaves are darker in color. The color of long shoots is fundamentally different from the color of the trunk and branches - it should be brown-black. The tone of the shoots will also change depending on the lighting.

How to draw a birch in oil or watercolor?

First, draw a birch trunk, without any irregularities and spots. In the example, the trees stand against the light, so the trunk is darker in the middle, it is “highlighted” along the edges. trunk in dark parts will have a bluish-gray tint. It is also necessary to darken the bottom of the trunk a little.

Then we start working with dark spots. They must be applied over the entire area of ​​\u200b\u200bthe trunk. If you plan to portray a young birch, then the spots should be placed horizontally, if the tree is older, then vertical bark defects predominate on it. Closer to the ground there are more spots and cracks. At the very base of the trunk, their pattern is such that it gives the impression of a black coarse fabric thrown over the trunk. While it is not necessary to draw spots especially carefully. Just mark their location with light gray paint.

The outer side of the spot is slightly behind the wood, so the edges should be lighter. When lightening the edges, you need to pay attention to which side more light hits it, it is there that the spots need to be lightened. Vertical jagged lines inside the spot are needed to give naturalness. They must be painted with a tone or slightly lighter than the stain itself.

Inside the stain, from the side of the illuminated edge, it is necessary to add paint darker than the stain itself. In order for some drawing to disappear, you need to shade the paint with a dry brush. Apply horizontal soft lines along the entire trunk. For this, it is best to use a single brush, and black paint can be mixed with blue and white.

Inna Koltsun

Drawing materials:

gouache;

watercolor paper;

The brushes are round and flat;

A glass of water;

Cloth for wiping brushes;

Palette.

Stage 1: Draw the background and field:

We take a sheet of paper vertically, make a wash of white gouache to the middle of the sheet(paint must be wet).

Then, on top of the white paint, we blur the yellow, red, brown paint, from the middle of the sheet brightening to the top.

We paint the lower remaining part of the sheet black, climbing a little to the horizon line, blurring it. Let the painting dry a bit.

Large, hard only with a dry brush we make colored spots using the method "poke" on the black bottom background of the sheet ( colors: yellow, red, ocher, green, white, blue, so you get field or flowering meadow.

Stage 2: Draw birch:

Mixing ocher and white on the palette gouache until a beige color is obtained. Then draw the trunk birches flat brush , down up. at the base birches press the brush firmly, and then, lifting it to the top, gradually turning it on edge and slowly tearing it off the paper (paints take abundantly)

On the right side birch brown gouache use a thin brush to circle the trunk birches, then with a flat dry brush we blur the paint to the middle of the trunk.

Then, with the thinnest brush, draw the branches birches, rotating it back and forth between the fingers (the brush must be wet, and the branches birches go not only up, but also down).

We take fine brush with black gouache and draw black spots

bark (lentils) different in shape and length (they should not be repeated and be symmetrical).

At the end of our drawing, we draw the foliage birches. We take a big, dry, hard brush, on it take green gouache and draw foliage using the method "poke".

That's all - the picture is ready!

Related publications:

Consultation "Work in preschool education - is it easy?" In my Essay, I want to cover this topic. Now I will try to approach the main concept of the topic covered. Labor is a purposeful activity.

So the time for golden autumn has passed. The first snow has already fallen. Even here in St. Petersburg the weather is quite wintery. But the beauty of golden autumn.

Abstract of a lesson in gouache drawing in the preparatory group "White Stork" Summary of the drawing lesson “White Stork” Topic: “White Stork” Purpose: teaching children how to draw a white stork and its nesting sites. Tasks:.

Not so long ago, in our preschool, there was a competition for making lapbooks. I want to bring to your attention a lapbook on the activity "10 ways.

Greetings to all fellow Maam members! Winter is here again and very soon the favorite holiday since childhood New Year. For those who have not yet taken up with.

Outline of direct educational activities in the middle group "There was a birch in the field" Integration educational areas: cognitive development, physical development, speech development, artistic and aesthetic development,.

Birch is an amazing and very useful tree for people. In the old days, birch was used not only for various crafts and building houses, but also for medicinal purposes. Bast shoes were woven from the bark, birch sap was collected in spring. And besides, you must admit that birch is also amazing beautiful tree, so they are often planted near the house.
Draw a birch it is not difficult, since only a birch tree has a white trunk with black stripes. There is no need to observe special "geometry" in the drawing of a birch, it is only important to draw the trunk and branches correctly so that they do not turn out to be of the same thickness and taper towards the edge and top of the crown. And to make it easier for you to draw a birch, you can use this step by step lesson. Step by step draw the trunk and main branches first, then determine the size of the birch crown and draw the leaves.

1. Draw the trunk and main branches of the birch

First draw this simple diagram for the trunk and main branches of a birch. Do not press hard on the pencil, because in the next step we will remove these lines.

2. General outline of birch

Circle with a simple pencil general contour and remove the original markup. Make sure that the branches and trunk taper towards the edge, otherwise the birch pattern will be too implausible. One part of the birch grows straight from the base of the tree, pay attention to this right away.

3. Draw birch branches without leaves

It is not necessary to observe the size and number of birch branches. Can draw a birch otherwise, however, do not draw the branches too straight, otherwise it will look more like a Christmas tree.

4. Draw the general contour of the birch crown

If it’s not so difficult to draw branches and a trunk, then it’s rather boring and long to draw numerous small birch leaves. Let's just draw the general outline of the birch crown, and then with shadows and color we will create the effect of leaves.

5. How to draw a birch with a simple pencil

First of all, draw the bark characteristic of birch - a white background with black stripes. Then, take a soft simple pencil and "ripple" depict birch foliage. This effect will even slightly "enliven" your picture, the crown in the picture will seem to make noise from the wind.

6. Drawing a birch on a graphics tablet

Of course, when you need to draw a winter birch, you do not need to draw the leaves and paint the tree either. But the winter birch is a rather dull story for children's drawing, so let's draw a birch tree with leaves. And if you like to draw a birch, you can draw a few more birches nearby, the surrounding forest landscape, the sky, the sun. Then your birch tree will be very beautiful and with mood.

This lesson is about how to draw maple leaves. The leaves of a birch are not at all like that, and even with a weak wind they "noise".

Grow in the birch forest different mushrooms, but most often there are white and boletus.

A hare does not always have white fur. He changes his gray "fur coat" to white only in winter, so as not to stand out in the snow and be invisible to the fox and wolf.